Search Results
5043 results
CPM2A-20ETLCH
Omron / CPM2
Engineered for diverse applications, the CPM2A-20ETLCH input simulator supports supply voltages from 100 to 240 V AC at 50/60 Hz or 24 V DC. It maintains operational effectiveness within the 85 to 264 V AC voltage range and 20.4 to 26.4 V DC. This device offers reliable performance, with a maximum p
CPM2A-40CDT1-D
Omron / CPM2
The Omron CPM2A-40CDT1-D CPU unit incorporates 24 DC input points and 16 transistor sourcing output points, all powered by a supply voltage of 24 V. The operational voltage range extends from 20.4 to 26.4 V DC. This unit features a power consumption of 4.5 watts, and the output specifications includ
C1000H-CPU01-E
Omron / CVM1
With a total instruction capacity 174, including 12 fundamental and 162 advanced commands, the C1000H-CPU01-E is built for versatility. It allows for programming ladder logic diagrams and accommodates a data memory size of 4,096 words. The processor operates effectively between 0°C to 55°C and suppo
CS1W-OD231
Omron / CS1
This output module is designed specifically for the CS1 series, operating without any inputs. It draws 0.27 Amps for functionality, maintaining a maximum leakage current of 0.1 mA. Sinking outputs are available, with a maximum residual voltage rating of 1.5V. The module connects to the CS I/O Bus an
CQM1H-AVB41
Omron / CQM1
The Omron CQM1H-AVB41 is equipped with four analog setting screws, each adjusting values stored as 4-digit BCD between 0000 and 0200. Located on the front panel, these variable resistors correspond to analog settings words (IR 220 to IR 223), with a small Phillips screwdriver, the setting can be adj
C200HW-NC113
Omron / C200H
The C200HW-NC113 module is a C200H series position control module that was manufactured by Omron and designed for industrial automation applications. It enables accurate control of a single axis in an industrial system and is compatible with stepping motor drivers and servo motor drivers that have p
CJ1W-NC133
Omron / CJ1
The CJ1W-NC133 motion control module from Omron Automation is a compact, adaptable module designed for precise motion control in industrial automation systems. It permits open-loop control of a single axis and is compatible with stepper motor drivers and servo devices with pulse-train input. With a
CPM1A-10CDT1A
Omron / CPM1
This control log unit operates within a supply voltage range of 100 to 240 VAC and supports an operational temperature between 0°C and 55°C. The memory capacity is 1K words, and the mounting options include chassis mount and DIN rail setups. Communication is enabled through an RS-232C interface, and
DRT1-ID161Q
Omron / DRT
This terminal features 16 digital inputs and employs terminal block wiring. It is optimized for use with PNP (sourcing) sensors and requires approximately 6 mA of current per input point. With an enclosure protection rating of IP20, the device is suited for indoor applications and is mounted on DIN
CP1E-N30DT-D
Omron / CP1
This Omron application model CPU features 30 total I/O points, including 18 DC inputs and 12 sinking transistor outputs. It requires a DC power supply and operates effectively within a voltage range of 20.4 to 26.4 VDC. This CPU measures 8.5 cm by 13 cm by 9 cm and weighs about 0.48 kg.