Search Results
5043 results
NT600G-DT212
Omron / NT
This Omron HMI operates with a supply voltage of 24 VDC and consumes a maximum of 20 watts of power. It is equipped with multiple communication ports including RS-232C, RS-422A, and RS-485. The device can withstand shock levels of 147 m/s² and vibrations of 10 to 55 Hz at a 0.75 mm amplitude, with s
3G2A5-ID111
Omron / 3G2
The 3G2A5-ID111 is a digital input unit specifically designed with programmable controllers. This component accommodates eight input points, each operating at 24 VDC. It exhibits an input current of 4 mA and an input resistance of 5 kΩ per point. Suitable for installation, it features a design for D
C500-AD501
Omron / C500
The C500-AD501 input module operates with optical isolation rated at 1,500 VDC between the terminal inputs and the connected PC. It supports an extensive input voltage range from 0 to ±10 VDC and current ranges from 0 to ±20 mA. With a low power consumption of 6.2 W maximum, it is designed for effic
CPM2A-40CDT1-D
Omron / CPM2
The Omron CPM2A-40CDT1-D CPU unit incorporates 24 DC input points and 16 transistor sourcing output points, all powered by a supply voltage of 24 V. The operational voltage range extends from 20.4 to 26.4 V DC. This unit features a power consumption of 4.5 watts, and the output specifications includ
C1000H-CPU01-E
Omron / CVM1
With a total instruction capacity 174, including 12 fundamental and 162 advanced commands, the C1000H-CPU01-E is built for versatility. It allows for programming ladder logic diagrams and accommodates a data memory size of 4,096 words. The processor operates effectively between 0°C to 55°C and suppo
CQM1H-AVB41
Omron / CQM1
The Omron CQM1H-AVB41 is equipped with four analog setting screws, each adjusting values stored as 4-digit BCD between 0000 and 0200. Located on the front panel, these variable resistors correspond to analog settings words (IR 220 to IR 223), with a small Phillips screwdriver, the setting can be adj
C200HW-NC113
Omron / C200H
The C200HW-NC113 module is a C200H series position control module that was manufactured by Omron and designed for industrial automation applications. It enables accurate control of a single axis in an industrial system and is compatible with stepping motor drivers and servo motor drivers that have p
DRT1-ID161Q
Omron / DRT
This terminal features 16 digital inputs and employs terminal block wiring. It is optimized for use with PNP (sourcing) sensors and requires approximately 6 mA of current per input point. With an enclosure protection rating of IP20, the device is suited for indoor applications and is mounted on DIN
CP1E-N30DT-D
Omron / CP1
This Omron application model CPU features 30 total I/O points, including 18 DC inputs and 12 sinking transistor outputs. It requires a DC power supply and operates effectively within a voltage range of 20.4 to 26.4 VDC. This CPU measures 8.5 cm by 13 cm by 9 cm and weighs about 0.48 kg.
C200H-CPU01-E2
Omron / C200H
This programmable controller supports a maximum power consumption of 120 VA per rack and operates efficiently within a specified voltage range. The surge current can reach approximately five times the normal current, supporting high transient loads. Offering a main control element based on MPU, CMOS