Search Results
5043 results
CIMR-G5U4011
Omron / CIMR
This AC drive supports an input voltage range of 380 to 460 VAC and is engineered for three-phase systems. It has an output frequency capability of 0 to 400 Hz. The device is rated for a maximum input current of 35 Amps and provides an output voltage ranging from 0 to 460 VAC. The CIMR-G5U4011 weigh
CPM2A-40CDT1-D
Omron / CPM2
The Omron CPM2A-40CDT1-D CPU unit incorporates 24 DC input points and 16 transistor sourcing output points, all powered by a supply voltage of 24 V. The operational voltage range extends from 20.4 to 26.4 V DC. This unit features a power consumption of 4.5 watts, and the output specifications includ
CS1W-OD231
Omron / CS1
This output module is designed specifically for the CS1 series, operating without any inputs. It draws 0.27 Amps for functionality, maintaining a maximum leakage current of 0.1 mA. Sinking outputs are available, with a maximum residual voltage rating of 1.5V. The module connects to the CS I/O Bus an
CJ1W-NC133
Omron / CJ1
The CJ1W-NC133 motion control module from Omron Automation is a compact, adaptable module designed for precise motion control in industrial automation systems. It permits open-loop control of a single axis and is compatible with stepper motor drivers and servo devices with pulse-train input. With a
C200H-CN222
Omron / C200H
The C200H-CN222 is a sturdy 2-meter connection cable intended for smooth industrial control system connectivity. With a main unit output voltage accuracy of 10% above nominal and -15% under, paired with a minimum output current capacity of 30 mA, it provides reliable data transmission. Signal stabil
C1000H-CPU01-E
Omron / CVM1
With a total instruction capacity 174, including 12 fundamental and 162 advanced commands, the C1000H-CPU01-E is built for versatility. It allows for programming ladder logic diagrams and accommodates a data memory size of 4,096 words. The processor operates effectively between 0°C to 55°C and suppo
CPM1-ETL01-CH
Omron / CPM1
Designed for the CPM1 Series, this input simulator operates effectively within temperatures ranging from 0°C to 55°C. It features screw terminal terminations and a maximum response time of 10 milliseconds. Approved by agencies such as CE, CSA, and UL, it also meets storage temperature requirements b
CQM1H-AVB41
Omron / CQM1
The Omron CQM1H-AVB41 is equipped with four analog setting screws, each adjusting values stored as 4-digit BCD between 0000 and 0200. Located on the front panel, these variable resistors correspond to analog settings words (IR 220 to IR 223), with a small Phillips screwdriver, the setting can be adj
C200HW-NC113
Omron / C200H
The C200HW-NC113 module is a C200H series position control module that was manufactured by Omron and designed for industrial automation applications. It enables accurate control of a single axis in an industrial system and is compatible with stepping motor drivers and servo motor drivers that have p
DRT1-ID161Q
Omron / DRT
This terminal features 16 digital inputs and employs terminal block wiring. It is optimized for use with PNP (sourcing) sensors and requires approximately 6 mA of current per input point. With an enclosure protection rating of IP20, the device is suited for indoor applications and is mounted on DIN