Search Results
5043 results
NT600G-DT212
Omron / NT
This Omron HMI operates with a supply voltage of 24 VDC and consumes a maximum of 20 watts of power. It is equipped with multiple communication ports including RS-232C, RS-422A, and RS-485. The device can withstand shock levels of 147 m/s² and vibrations of 10 to 55 Hz at a 0.75 mm amplitude, with s
C500-AD501
Omron / C500
The C500-AD501 input module operates with optical isolation rated at 1,500 VDC between the terminal inputs and the connected PC. It supports an extensive input voltage range from 0 to ±10 VDC and current ranges from 0 to ±20 mA. With a low power consumption of 6.2 W maximum, it is designed for effic
CIMR-G5U4011
Omron / CIMR
This AC drive supports an input voltage range of 380 to 460 VAC and is engineered for three-phase systems. It has an output frequency capability of 0 to 400 Hz. The device is rated for a maximum input current of 35 Amps and provides an output voltage ranging from 0 to 460 VAC. The CIMR-G5U4011 weigh
CPM2A-20ETLCH
Omron / CPM2
Engineered for diverse applications, the CPM2A-20ETLCH input simulator supports supply voltages from 100 to 240 V AC at 50/60 Hz or 24 V DC. It maintains operational effectiveness within the 85 to 264 V AC voltage range and 20.4 to 26.4 V DC. This device offers reliable performance, with a maximum p
CPM1A-30CDR-D
Omron / CPM1
This controller unit supports a relay output type with a maximum switching capacity of 250 VAC at 2 A and 24 VDC at 2 A. It maintains performance within an operating temperature of 0° to 55°C and humidity levels from 10% to 90% without condensation. The control method utilized is based on a stored p
C200H-TM001
Omron / C200H
The C200H-TM001 timer module is an analog timer unit that belongs to the C200H series of programmable logic controllers (PLCs) and is used for precise and synchronized time control in industrial automation and control applications. This device can run on a 5-volt power source and drain up to 0.06 am
CQM1H-AVB41
Omron / CQM1
The Omron CQM1H-AVB41 is equipped with four analog setting screws, each adjusting values stored as 4-digit BCD between 0000 and 0200. Located on the front panel, these variable resistors correspond to analog settings words (IR 220 to IR 223), with a small Phillips screwdriver, the setting can be adj
DRT1-ID161Q
Omron / DRT
This terminal features 16 digital inputs and employs terminal block wiring. It is optimized for use with PNP (sourcing) sensors and requires approximately 6 mA of current per input point. With an enclosure protection rating of IP20, the device is suited for indoor applications and is mounted on DIN
C200HW-PA204R
Omron / C200H
This power supply unit consumes 120 volts and amperes of power. It is designed to function effectively in ambient temperatures ranging from 0 to 55°C and has storage capabilities at temperatures as low as -25°C and up to 70°C. The unit is certified for safety standards, including UL and CSA, ensurin
R88M-G1K030T
Omron / R88M
This AC servomotor features an absolute encoder for precise control and operates efficiently within a temperature range of 0°C to 40°C. The rated torque is 22.7 oz-in (160 mN/m), and the motor weighs approximately 4.54 kg. The termination style is a connector, enhancing installation convenience.