Search Results
5043 results
NT600G-DT212
Omron / NT
This Omron HMI operates with a supply voltage of 24 VDC and consumes a maximum of 20 watts of power. It is equipped with multiple communication ports including RS-232C, RS-422A, and RS-485. The device can withstand shock levels of 147 m/s² and vibrations of 10 to 55 Hz at a 0.75 mm amplitude, with s
3G2A5-ID111
Omron / 3G2
The 3G2A5-ID111 is a digital input unit specifically designed with programmable controllers. This component accommodates eight input points, each operating at 24 VDC. It exhibits an input current of 4 mA and an input resistance of 5 kΩ per point. Suitable for installation, it features a design for D
CIMR-G5U4011
Omron / CIMR
This AC drive supports an input voltage range of 380 to 460 VAC and is engineered for three-phase systems. It has an output frequency capability of 0 to 400 Hz. The device is rated for a maximum input current of 35 Amps and provides an output voltage ranging from 0 to 460 VAC. The CIMR-G5U4011 weigh
CPM1A-30CDR-D
Omron / CPM1
This controller unit supports a relay output type with a maximum switching capacity of 250 VAC at 2 A and 24 VDC at 2 A. It maintains performance within an operating temperature of 0° to 55°C and humidity levels from 10% to 90% without condensation. The control method utilized is based on a stored p
C200H-TM001
Omron / C200H
The C200H-TM001 timer module is an analog timer unit that belongs to the C200H series of programmable logic controllers (PLCs) and is used for precise and synchronized time control in industrial automation and control applications. This device can run on a 5-volt power source and drain up to 0.06 am
CQM1H-AVB41
Omron / CQM1
The Omron CQM1H-AVB41 is equipped with four analog setting screws, each adjusting values stored as 4-digit BCD between 0000 and 0200. Located on the front panel, these variable resistors correspond to analog settings words (IR 220 to IR 223), with a small Phillips screwdriver, the setting can be adj
CPM1-ETL01-CH
Omron / CPM1
Designed for the CPM1 Series, this input simulator operates effectively within temperatures ranging from 0°C to 55°C. It features screw terminal terminations and a maximum response time of 10 milliseconds. Approved by agencies such as CE, CSA, and UL, it also meets storage temperature requirements b
HMC-EP551
Omron / CVM1
This memory card acts as a module and requires the CV500 MCW01 for functionality. It is compatible with the CV500-MCW01 memory card and necessitates a memory card writer or peripheral device for proper operation.
DRT1-ID161Q
Omron / DRT
This terminal features 16 digital inputs and employs terminal block wiring. It is optimized for use with PNP (sourcing) sensors and requires approximately 6 mA of current per input point. With an enclosure protection rating of IP20, the device is suited for indoor applications and is mounted on DIN
CP1E-N30DT-D
Omron / CP1
This Omron application model CPU features 30 total I/O points, including 18 DC inputs and 12 sinking transistor outputs. It requires a DC power supply and operates effectively within a voltage range of 20.4 to 26.4 VDC. This CPU measures 8.5 cm by 13 cm by 9 cm and weighs about 0.48 kg.