105 results
Schneider Electric / ALTISTART
This soft starter is designed for 3-phase applications and can support motor power ratings of either 10 hp or 15 hp. It has an IcL starter rating of 22 A and draws a nominal load current of 110 A. Power dissipation measurements stand at 124.5 W during transient conditions and drop to just 4.5 W at f
Schneider Electric / ALTISTART
This soft starter supports a maximum horsepower rating of 10 HP at 460 volts and up to 20 HP at 575 volts. It features five discrete inputs and two discrete outputs for flexible configuration. The communication is enhanced through the Modbus protocol, utilizing an RJ45 connector and an RS485 multidr
Schneider Electric / ALTISTART
This asynchronous motor boasts a power rating of 22/45 kW and has a factory setting current of 81 A. It features a protections level of IP20 and requires forced convection for optimal cooling. The rated starting current for the IcL starter is set at 88 A, and its control circuit consumption is limit
Schneider Electric / ALTISTART
The ATS48C59Y operates within a frequency range of 50 to 60 Hz, with a tolerance of ±5%. It efficiently manages motors with power ratings between 150 to 500 horsepower based on voltage and duty cycles. This unit also features multiple protective functions, including safeguards against phase loss and
Schneider Electric / ALTISTART
Capable of operating on three phases, this soft starter has a factory setting current of 40 A and power dissipation of 48 W. It features an IP20 protection class and uses a heat sink assembly style. The device also supports Modbus communication protocol.
Schneider Electric / ALTISTART
This soft starter maintains rated current capacities of 160A or 170A and operates effectively within line frequencies of 50 or 60 Hz. With a short-circuit current rating (SCCR) of 18 KAIC, it ensures reliable protection against overload. It requires a wire size of 240 mm rated for 75°C and a tighten
Schneider Electric / ALTISTART
This soft starter efficiently manages input voltages from 200 to 480 VAC, offering an output current of 14 A. Built-in protections against phase failure, imbalance, and overcurrent enhance its operational reliability. Measuring 176 x 132 x 133 mm, it has an IP20 enclosure rating suitable for panel m
Schneider Electric / ALTISTART
Designed for 3-phase operations, the ATS46C32N supports power outputs spanning from 100 to 250 HP or 75 to 186 kW. It operates at a frequency input of 50/60 Hz and is designed to work seamlessly with TESYS D and F-LINE contactors. This controller is built for use in environments free from corrosive
Schneider Electric / ALTISTART
This soft starter accommodates a network frequency from 47.5 to 63 Hertz and nominal load currents up to 60 Amperes. Rated for an input current of 12 Amperes, it can run on supply voltages between 342 and 465 volts AC, encompassing a frequency range of 50 to 60 Hertz.
Schneider Electric / ALTISTART
This soft starter operates effectively within a frequency range of 50/60 Hz and is designed for wall or floor mounting. With an operating temperature range of -10°C to +40°C, it accommodates a wide array of industrial environments. The device utilizes microprocessor-based control and has a protectio