33 results
Siemens / SITOP
This battery module supports both 6 A and 15 A SITOP DC UPS modules. It can achieve a maximum charging current of 0.8 A and can deliver up to 9.6 A in buffering mode. The unit can handle pulse currents up to 15 A, operating efficiently in a temperature range from 0°C to 50°C.
Siemens / SITOP
The selectivity module features four output channels and operates with an input current of 40 A. Rated at 24 V DC, it supports maximum operating conditions of up to 40 °C and is designed for use in environments with humidity levels reaching 80% (non-condensing). This module has an IP20 protection ra
Siemens / SITOP
This power supply executes operation within a 3-phase system and offers output voltage levels at 24 V DC, supporting a maximum output current of 40 A. It delivers a total output power rating of 960 W. The device requires a minimum input current of 2.0 A at 400 V, decreasing to 1.7 A when at the maxi
Siemens / SITOP
This power supply mounts easily on a DIN rail (TS 35) and functions efficiently within an input frequency of 47 to 63 Hz. Operating temperatures range from -25 to +70 degrees Celsius, and it can withstand storage conditions as low as -40 degrees and up to 85 degrees Celsius. With IP20 protection, it
Siemens / SITOP
This power supply supports single-phase or two-phase input for AC and DC configurations. Equipped with three LED indicators in red, green, and yellow, it provides clear status feedback. It has an IP20 protection rating and operates within a frequency range of 47 to 63 Hz. Designed for DIN rail insta
Siemens / SITOP
This UPS module features an output voltage range of 19 to 28.5 volts and provides an output current of 40 Amps. Typical startup delay time for this unit is about 360 ms. It boasts an impressive efficiency rating of 97.20%, while maintaining a power loss of only 28.6 watts. Compliance with CE standar
Siemens / SITOP
This power supply operates within a frequency range of 47 Hz to 63 Hz and accepts an input current of 0.7 A. It provides an output current of 10.0 A at 24 V DC, ensuring controlled and isolated DC output. An inrush current limit of 20 A offers additional protection, while the power loss is measured
Siemens / SITOP
Part of the SITOP series, this power supply accommodates a frequency of 50/60 Hz and can accept input currents of 1.6 A at 400 V or 1.3 A at 500 V. It features output overvoltage protection below 35 V and supports an output current of up to 30 A. A green LED provides a status indication for the 24 V
Siemens / SITOP
This power supply designed for 3-phase input delivers regulated 24 VDC and is stabilized for consistent performance. It supports input frequencies of 50/60 Hertz. The unit operates efficiently between 0 and 40 degrees Celsius and is capable of storing in temperatures up to 50 degrees Celsius. Both o
Siemens / SITOP
This DC/DC converter features a robust construction with an IP67 rating, ensuring protection against water and dust ingress. It supports a power rating of 84 W and an input current of 4.2 A. The efficiency is rated at 0.93, reflecting its effectiveness in energy conversion. Designed for easy install