98 results
GE Fanuc Emerson / RSTi PacSystem
The ST-1218 is a discrete input module featuring a positive logic configuration designed for industrial systems. It supports 8 inputs operating on a 12 to 24 V DC voltage range, specifically within 10.2 to 28.8 volts. Each input channel can accommodate a current of up to 6 mA when supplied at 28.8 V
GE Fanuc Emerson / RSTi PacSystem
This output module is designed to provide 8 positive logic outputs that operate within a voltage range of 24V DC, specifically from 11 to 28.8V DC. It features a fast response time of up to 0.3 milliseconds for turning OFF and ON. The maximum load current per output is 0.5 Amps, with a total maximum
GE Fanuc Emerson / RSTi PacSystem
This GE Fanuc Emerson analog output module is designed for the RSTi-EP series, operating with a system bus that achieves a transfer rate of 48 Mbps. It is powered by a supply voltage range of 20.4V to 28.8V and measures 0.45 inches in height, 2.99 inches in width, and 4.72 inches in depth. It weighs
GE Fanuc Emerson / RSTi PacSystem
Designed for the RSTi PacSystem series, the EP-1813 is capable of handling input voltages from 0 to 300V AC, applicable for both single-phase and three-phase systems. It operates with a sampling rate of 3300 samples per second and provides a 16-bit resolution per channel. With a bus transfer rate of
GE Fanuc Emerson / RSTi PacSystem
This slave network interface module functions with a field power voltage range from 11 to 28.8 V DC. It supports baud rates of 125, 250, or 500 kilobits per second, with an impressive maximum bus length of 500 meters, depending on the baud rate. Designed for various environmental conditions, it oper
GE Fanuc Emerson / RSTi PacSystem
This GE Fanuc Emerson CC-Link RSTi starter kit provides diverse I/O capabilities, featuring 8 positive inputs and 8 source outputs, along with 4 analog inputs and outputs, all operating at 24V DC. The kit supports a comprehensive range of applications with its analog functionality of 4-20mA for both
GE Fanuc Emerson / RSTi PacSystem
The input module features four discrete inputs with an input voltage rating of 110V AC at a frequency of 47-63 Hz. It has a signal delay of 10 milliseconds. The ON state requires a voltage between 85-132V AC, while the OFF state voltage threshold is 60V AC. The maximum current is limited to 8 mA per
GE Fanuc Emerson / RSTi PacSystem
This module facilitates communication with a baud rate range of 9.6 Kbps to 12 Mbps, allowing for effective data transmission over distances ranging from 100 meters to 1.2 kilometers. It can accommodate a maximum of 100 nodes, with the ability to expand I/O capacity by adding up to 8 additional modu
GE Fanuc Emerson / RSTi PacSystem
This adapter module utilizes the PROFIBUS-DP V1 protocol. It features a 9-pole SUB-D socket and enables configuration via a Micro USB 2.0 interface. The Fieldbus transfer rate is up to 12 Mbps, while the RTSi-EP system bus supports up to 48 Mbps. The module operates with a supply voltage range of 20
GE Fanuc Emerson / RSTi PacSystem
This starter kit operates on a 24 VDC voltage level, employing a positive logic input type and sourcing outputs. With 8 inputs and 8 outputs, it supports an input current range from 4 to 20 mA and a fixed output current of 20 mA. The unit is rated IP00 and functions effectively within a 0 to 50 degr