2732 results
FANUC / A06B
As a dual-axis control unit, the FANUC A06B-6047-H203 servo drive allows for simultaneous operation of its axes. It features a panel mount design and is protected within an IP20-rated enclosure. The servo drive utilizes control PCBs, such as the A16B-1200-0230 and A20B-1000-0220 PCBs, for effective
FANUC / A06B
This servo amplifier module supports a dual-channel configuration, allowing for the independent control of two axes. It operates with an input current of 17 A and maintains an output current rating of 8.7 A for both the L and M axes. The amplifier is compatible with FANUC Alpha series motors and int
FANUC / A06B
This robot interface cable features 18 cores made from stranded copper, ensuring robust electrical conductivity. It has a voltage rating of up to 300 V and is compatible with controllers R-30iB/R-30iB Plus and R-J3iB. The cable exhibits exceptional chemical resistance against oil, coolant, and micro
FANUC / A06B
This AC servo drive operates at a maximum ambient temperature of 60 degrees Celsius and a minimum of 0 degrees. It supports an operating humidity of up to 80% without condensation. The A06B-6057-H003 is rated for safe operation at altitudes of up to 1000 meters without any derating, and it meets IP2
FANUC / A06B
As part of the A06B series, this unit accepts an input current of 37 A at 400 V. The output voltage varies between 565 and 679 V DC, ensuring compatibility with various CNC applications. Built-in protection mechanisms are designed to safeguard against overvoltage, overcurrent, and overheating, while
FANUC / A06B
This power line connector features four contact points and is designed for crimping tools during installation. Compatible with the Fanuc Servo Amplifier Alphan I series, it supports wire diameters of 0.75 mm, 2.0 mm, and 5.5 mm. The plastic housing supports a reliable connection, and it operates eff
FANUC / A06B
This AC servo motor is suited for CNC and robotics applications. It features a peak torque of 30 Nm and can achieve speeds up to 3000 RPM. With an IP65 protection class, it is designed to withstand dust and moisture. The unit requires a continuous current of 10A and is air-cooled for optimal perform
FANUC / A06B
Within this A06B PMSM, the base speed can reach 2000 RPM under full load conditions. The electrical insulation grade is Class F, providing a thermal tolerance of up to 155°C. This device utilizes a 3-phase AC input configuration and features a delta (Δ) arrangement for the stator windings. Additiona
FANUC / A06B
Designed to operate efficiently under humidity conditions up to 80% (non-condensing), this discharge unit maintains its performance in various settings. It can be stored between 0 to 50 degrees Celsius while withstanding altitudes up to 1000 meters above sea level. This unit weighs approximately 20
FANUC / A06B
This AC servo motor features a stall torque of 8 Nm and achieves a rated speed of 3000 RPM. It does not include a brake and is equipped with an incremental encoder. The protection level of IP65 ensures suitability for outdoor operations and environments with moisture. It has a tapered, keyed shaft c