105 results
Schneider Electric / ALTISTART
This soft starter is designed for 3-phase applications and can support motor power ratings of either 10 hp or 15 hp. It has an IcL starter rating of 22 A and draws a nominal load current of 110 A. Power dissipation measurements stand at 124.5 W during transient conditions and drop to just 4.5 W at f
Schneider Electric / ALTISTART
This soft starter is capable of accommodating a supply voltage variance of -15% to +10%. It is rated for 140 A under typical operating conditions and offers a typical power loss of 82 W. The ATS22C14Q is designed specifically for AC-53A applications and utilizes a torque-controlled starting method t
Schneider Electric / ALTISTART
This soft starter maintains rated current capacities of 160A or 170A and operates effectively within line frequencies of 50 or 60 Hz. With a short-circuit current rating (SCCR) of 18 KAIC, it ensures reliable protection against overload. It requires a wire size of 240 mm rated for 75°C and a tighten
Schneider Electric / ALTISTART
This unit operates at a frequency of 50/60 Hz and is designed for standard mounting. It weighs 8.62 kg and features a control method that allows for soft start and stop operations. Suitable for environments with a maximum humidity of 80% (non-condensing), this device can function in temperatures ran
Schneider Electric / ALTISTART
This soft starter efficiently manages input voltages from 200 to 480 VAC, offering an output current of 14 A. Built-in protections against phase failure, imbalance, and overcurrent enhance its operational reliability. Measuring 176 x 132 x 133 mm, it has an IP20 enclosure rating suitable for panel m
Schneider Electric / ALTISTART
Capable of operating on three phases, this soft starter has a factory setting current of 40 A and power dissipation of 48 W. It features an IP20 protection class and uses a heat sink assembly style. The device also supports Modbus communication protocol.
Schneider Electric / ALTISTART
This soft starter enables adjustable starting torque from 30% to 80% of the motor's direct line supply torque. Both the starting and deceleration times can be finely tuned, ranging from 1 to 10 seconds each. The unit features an integrated bypass to minimize noise and heat dissipation, increasing ov
Schneider Electric / ALTISTART
This soft starter accommodates a network frequency from 47.5 to 63 Hertz and nominal load currents up to 60 Amperes. Rated for an input current of 12 Amperes, it can run on supply voltages between 342 and 465 volts AC, encompassing a frequency range of 50 to 60 Hertz.
Schneider Electric / ALTISTART
This soft starter controller operates at an input voltage range of 208/230 VAC, 380/400 VAC, and 460/500 VAC. Its IP20 enclosure rating signifies suitability for indoor use, offering effective protection within its designed environment. The controller ensures reliable performance with an overload ca
Schneider Electric / ALTISTART
This soft starter supports a current rating of 170 A and has a modest power rating of 91 W. It is functional in both 50 and 60 Hz frequency environments. Designed for a temperature range of -10°C to +50°C, it conforms to an IP20 protection class for adequate operational safety.