1305-AA02A-HA1 | Allen Bradley Drives 1305 AC Drives

1305-AA02A-HA1

Rated 4.9 with 13 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1305-AA02A-HA1

Revisions: Ser A 
Description: The Allen-Bradley/Rockwell Automation 1305-AA02A-HA1 AC drive is a 1305 series AC drive. This drive supports both single-phase and 3-phase voltage. The 1305-AA02A-HA1 AC drive’s single-phase voltage rating is 200 to 240 Volts AC and its 3-phase voltage rating is 200 to 230 Volts AC. Its enclosure is a NEMA Type 1 enclosure with an IP 30 environmental protection rating. The 1305-AA02A-HA1 AC drive has an HA1 HMI with an analog speed potentiometer.
Available Now
Request a quote for 1305-AA02A-HA1

Description: The Allen-Bradley/Rockwell Automation 1305-AA02A-HA1 AC drive is a 1305 series AC drive. This drive supports both single-phase and 3-phase voltage. The 1305-AA02A-HA1 AC drive’s single-phase voltage rating is 200 to 240 Volts AC and its 3-phase voltage rating is 200 to 230 Volts AC. Its enclosure is a NEMA Type 1 enclosure with an IP 30 environmental protection rating. The 1305-AA02A-HA1 AC drive has an HA1 HMI with an analog speed potentiometer.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1305-AA02A-HA1.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 13 reviews

    Technical Specifications for 1305-AA02A-HA1

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1305-AA02A-HA1
Product Line1305 AC Drives
Enclosure TypeIP 30 (NEMA Type 1)
Voltage200-240V, Single Phase or 200-230V Three Phase
Human Interface ModulesHIM with Analog Speed Pot
LanguageEnglish
Horsepower.5 HP
Motor Rating (kW, Output Current).37 kW 2.3 A
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1305-AA02A-HA1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-AA02A-HA1 units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1305-AA02A-HA1
Product Line1305 AC Drives
Enclosure TypeIP 30 (NEMA Type 1)
Voltage200-240V, Single Phase or 200-230V Three Phase
Human Interface ModulesHIM with Analog Speed Pot
LanguageEnglish
Horsepower.5 HP
Motor Rating (kW, Output Current).37 kW 2.3 A
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1305-AA02A-HA1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-AA02A-HA1 units instead of migration.

s

About 1305-AA02A-HA1

The 1305-AA02A-HA1 Adjustable AC Frequency Drive by Allen-Bradley is an AC variable frequency drive with an Analog Speed Potentiometer Human Interface Module (HIM) which provides microprocessor control of a 3-phase induction motor. The drive, like other members in the series, produces a 3-phase pulse width modulation adjustable frequency output corresponding to the drive’s output voltage, to vary the motor speed. The 1305-AA02A-HA1 has 2.3A output current with 0.37kW output power and an adjustable output voltage from 0 volts to the input voltage at a 0-400Hz programmable output frequency. The drive has an operating voltage range of 180-265V AC at 50-60Hz, 0.9KVA input real power, and 0.8m lagging displacement power factor at 97.5% drive efficiency. The drive comes with a 5V DC contact closure control input, with 10K Ohms, 1W external speed potentiometer, and 1 Unipolar Voltage (0-10V DC) or Current (4-20mA), 10-bit non-isolated analog input, with 100K Ohms and 250 Ohms of input impedance. The 1305-AA02A-HA1 has 1 programmable Form A Relay contact with 5A and 2A resistive and inductive ratings at 115V AC/30V DC, and 1 programmable 24V DC open collector output with 50mA maximum output current.





The 1305-AA02A-HA1 also has a 0 to 10V DC, 8-bit Analog output, with load impedance greater than 4000k Ohms, and the drive uses the Sine weighted PWM output as PWM output Algorithm. It provides output control via the Volt per Hertz control, with adjustable Carrier frequency range of 2 to 8 kHz, and it employs the IGBT Intelligent Power Module as output switching device. The 1305-AA02A-HA1 offers a programmable 20% to 150% limiting current start for trip-free operation, and it provides overcurrent protection at 200% hardware limit and 300% instantaneous fault. It also provides adjustable (20-115%) electronic motor overload protection, with under and over-voltage protection with the monitored DC BUS voltage, and it offers a power and control ride-thru time of 15ms and 0.5s. The 1305-AA02A-HA1 is designed with the Analog Speed Potentiometer HIM, with 16 characters and 2 lines of display space on the English-language LCD Display, and it communicates via the optional I/O, or RS232/422/485/DH485 or RS232/422/485/DF1 Adapter Module. It comes in a NEMA Type 1 (IP30) rated enclosure, and it provides cooling via the convention cooling mechanism. It can withstand a 1G operating shock, and it can function without de-rating at a height of up to 1000m. Its working temperature range is 0-50 ºC at 0-95% non-condensing humidity, and it is stored at -40-70 ºC temperature range. The 1305-AA02A-HA1 weighs about 1.6Kg (3.5lb), and its total dimensions are 120mm x 195mm x 122mm (4.72in x 7.68in x 4.8in).



Technical Description of 1305-AA02A-HA1

1305-AA02A-HA1 1305 AC Drives with IP 30 (NEMA Type 1) enclosure, 200-240V, Single Phase or 200-230V Three Phase rating and HIM with Analog Speed Pot interface. English language

Repair Services for 1305-AA02A-HA1

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1305-AA02A-HA1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1305-AA02A-HA1

Please refer to the manual for more information about the 1305-AA02A-HA1 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1305-AA02A-HA1 Ser A
1305-AA02A-HA1/A, Series A, Rev A Request Quote
Common misspellings:
  • l305-AA02A-HA1
  • 13o5-AA02A-HA1
  • 1305-AAo2A-HA1
  • 1305-AA02A-HAl
  • 1305AA02AHA1

Dimensions For 1305-AA02A-HA1

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1305-AA02A-HA1

Resolutions For 1305-AA02A-HA1

About

Technical Specifications for 1305-AA02A-HA1

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1305-AA02A-HA1
Product Line1305 AC Drives
Enclosure TypeIP 30 (NEMA Type 1)
Voltage200-240V, Single Phase or 200-230V Three Phase
Human Interface ModulesHIM with Analog Speed Pot
LanguageEnglish
Horsepower.5 HP
Motor Rating (kW, Output Current).37 kW 2.3 A
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1305-AA02A-HA1
Product Line1305 AC Drives
Enclosure TypeIP 30 (NEMA Type 1)
Voltage200-240V, Single Phase or 200-230V Three Phase
Human Interface ModulesHIM with Analog Speed Pot
LanguageEnglish
Horsepower.5 HP
Motor Rating (kW, Output Current).37 kW 2.3 A
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1305-AA02A-HA1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-AA02A-HA1 units instead of migration.

About 1305-AA02A-HA1

The 1305-AA02A-HA1 Adjustable AC Frequency Drive by Allen-Bradley is an AC variable frequency drive with an Analog Speed Potentiometer Human Interface Module (HIM) which provides microprocessor control of a 3-phase induction motor. The drive, like other members in the series, produces a 3-phase pulse width modulation adjustable frequency output corresponding to the drive’s output voltage, to vary the motor speed. The 1305-AA02A-HA1 has 2.3A output current with 0.37kW output power and an adjustable output voltage from 0 volts to the input voltage at a 0-400Hz programmable output frequency. The drive has an operating voltage range of 180-265V AC at 50-60Hz, 0.9KVA input real power, and 0.8m lagging displacement power factor at 97.5% drive efficiency. The drive comes with a 5V DC contact closure control input, with 10K Ohms, 1W external speed potentiometer, and 1 Unipolar Voltage (0-10V DC) or Current (4-20mA), 10-bit non-isolated analog input, with 100K Ohms and 250 Ohms of input impedance. The 1305-AA02A-HA1 has 1 programmable Form A Relay contact with 5A and 2A resistive and inductive ratings at 115V AC/30V DC, and 1 programmable 24V DC open collector output with 50mA maximum output current.





The 1305-AA02A-HA1 also has a 0 to 10V DC, 8-bit Analog output, with load impedance greater than 4000k Ohms, and the drive uses the Sine weighted PWM output as PWM output Algorithm. It provides output control via the Volt per Hertz control, with adjustable Carrier frequency range of 2 to 8 kHz, and it employs the IGBT Intelligent Power Module as output switching device. The 1305-AA02A-HA1 offers a programmable 20% to 150% limiting current start for trip-free operation, and it provides overcurrent protection at 200% hardware limit and 300% instantaneous fault. It also provides adjustable (20-115%) electronic motor overload protection, with under and over-voltage protection with the monitored DC BUS voltage, and it offers a power and control ride-thru time of 15ms and 0.5s. The 1305-AA02A-HA1 is designed with the Analog Speed Potentiometer HIM, with 16 characters and 2 lines of display space on the English-language LCD Display, and it communicates via the optional I/O, or RS232/422/485/DH485 or RS232/422/485/DF1 Adapter Module. It comes in a NEMA Type 1 (IP30) rated enclosure, and it provides cooling via the convention cooling mechanism. It can withstand a 1G operating shock, and it can function without de-rating at a height of up to 1000m. Its working temperature range is 0-50 ºC at 0-95% non-condensing humidity, and it is stored at -40-70 ºC temperature range. The 1305-AA02A-HA1 weighs about 1.6Kg (3.5lb), and its total dimensions are 120mm x 195mm x 122mm (4.72in x 7.68in x 4.8in).



Technical Description of 1305-AA02A-HA1

1305-AA02A-HA1 1305 AC Drives with IP 30 (NEMA Type 1) enclosure, 200-240V, Single Phase or 200-230V Three Phase rating and HIM with Analog Speed Pot interface. English language
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1305-AA02A-HA1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1305-AA02A-HA1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1305-AA02A-HA1 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1305-AA02A-HA1 Ser A
1305-AA02A-HA1/A, Series A, Rev A Request Quote

Common misspellings:
  • l305-AA02A-HA1
  • 13o5-AA02A-HA1
  • 1305-AAo2A-HA1
  • 1305-AA02A-HAl
  • 1305AA02AHA1
PDF