1305-AA02A-HAP | Allen Bradley Drives 1305 AC Drives

1305-AA02A-HAP

Rated 4.5 with 25 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1305-AA02A-HAP

Revisions: Ser A 
Description: The Allen-Bradley 1305-AA02A-HAP AC drive is a 1-phase and 3-phase type of AC drive. It is a member of the Allen-Bradley/Rockwell Automation 1305 AC drive product line. The 1305-AA02A-HAP AC drive can operate with 200 to 240 Volts AC 1-phase voltage or with 200 to 230 Volts AC 3-phase voltage, depending on the application. Its interface is a programmer-only type of interface. The 1305-AA02A-HAP AC drive operates in English by default.
Available Now
Request a quote for 1305-AA02A-HAP

Description: The Allen-Bradley 1305-AA02A-HAP AC drive is a 1-phase and 3-phase type of AC drive. It is a member of the Allen-Bradley/Rockwell Automation 1305 AC drive product line. The 1305-AA02A-HAP AC drive can operate with 200 to 240 Volts AC 1-phase voltage or with 200 to 230 Volts AC 3-phase voltage, depending on the application. Its interface is a programmer-only type of interface. The 1305-AA02A-HAP AC drive operates in English by default.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1305-AA02A-HAP.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 25 reviews

    Technical Specifications for 1305-AA02A-HAP

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1305-AA02A-HAP
Product Line1305 AC Drives
Enclosure TypeIP 30 (NEMA Type 1)
Voltage200-240V, Single Phase or 200-230V Three Phase
ListingThis content was written and compiled by dosupply.com and should not be copied.
Human Interface ModulesProgrammer Only
LanguageEnglish
Horsepower.5 HP
Motor Rating (kW, Output Current).37 kW 2.3 A
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1305-AA02A-HAP has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-AA02A-HAP units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1305-AA02A-HAP
Product Line1305 AC Drives
Enclosure TypeIP 30 (NEMA Type 1)
Voltage200-240V, Single Phase or 200-230V Three Phase
Human Interface ModulesProgrammer Only
LanguageEnglish
Horsepower.5 HP
Motor Rating (kW, Output Current).37 kW 2.3 A
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1305-AA02A-HAP has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-AA02A-HAP units instead of migration.

s

About 1305-AA02A-HAP

The 1305-AA02A-HAP is an Adjustable Frequency AC Drive manufactured by Allen-Bradley. This is the smallest Series C 1305 AC drive with an IP 30 enclosure, a 200 to 240 Volt AC Single Phase (1.2 A/0.19 kW) or 200 to 230 Volts AC three phase (2.3 A/0.37 kW) rating. The Programmer Only interface is installed on this model, which has an output frequency range of 0 to 400 Hertz. This device will be managed by control input signals, which will start and stop the motor. It has configurable inputs for 2 or 3 wire controls (start, stop, and forward/reverse functions), and furthermore, it has three configurable inputs of SW1, SW2, and SW3 for the control of seven preset speeds and two acceleration and deceleration times. This unit has one analog input at 0 to 10 Volts DC or 4 to 20 mA with a 10-bit resolution; its signal outputs can be configured as relay contacts or open collectors (sink) 24 Volts DC user supplied source voltage. One 8-bit analog output at 0 to 10 Volts DC is available. The 1305-AA02A-HAP output can be performed as a PWM algorithm, Volts per Hertz, or switching device 3-phase output. Start and run DC boosts can be conducted.



The input contactor should not be used for starting and stopping the motor and power supply switching should not occur more than once a minute. This module does not have a branch circuit protection. The recommended fuse sizes are 6 A for single phase inputs and 3 A for three phase inputs. Input and output power connections are made over a ten position terminal block. For single phase input, the AC input line should be connected to any two of the three input terminal positions. This module’s protective features include excessive temperature protection, over and under voltage protection, power and control ride through protection, and just ground and output short circuit protection. The 1305-AA02A-HAP dimensions are 120 x 195 x 122 millimeters (4.72 x 7.69 x 4.81 inches) and its shipping weight is approximately 1.6 kilograms (3.5 pounds). Its ambient temperature operating range is around 0 to 50 degrees Celsius.



Technical Description of 1305-AA02A-HAP

1305-AA02A-HAP 1305 AC Drives with IP 30 (NEMA Type 1) enclosure, 200-240V, Single Phase or 200-230V Three Phase rating and Programmer Only interface. English language

Repair Services for 1305-AA02A-HAP

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1305-AA02A-HAP. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1305-AA02A-HAP

Please refer to the manual for more information about the 1305-AA02A-HAP such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1305-AA02A-HAP Ser A
1305-AA02A-HAP/A, Series A, Rev A Request Quote
Common misspellings:
  • l305-AA02A-HAP
  • 13o5-AA02A-HAP
  • 1305-AAo2A-HAP
  • 1305AA02AHAP

Dimensions For 1305-AA02A-HAP

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1305-AA02A-HAP

Resolutions For 1305-AA02A-HAP

About

Technical Specifications for 1305-AA02A-HAP

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1305-AA02A-HAP
Product Line1305 AC Drives
Enclosure TypeIP 30 (NEMA Type 1)
Voltage200-240V, Single Phase or 200-230V Three Phase
Human Interface ModulesProgrammer Only
LanguageEnglish
Horsepower.5 HP
Motor Rating (kW, Output Current).37 kW 2.3 A
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1305-AA02A-HAP
Product Line1305 AC Drives
Enclosure TypeIP 30 (NEMA Type 1)
Voltage200-240V, Single Phase or 200-230V Three Phase
Human Interface ModulesProgrammer Only
LanguageEnglish
Horsepower.5 HP
Motor Rating (kW, Output Current).37 kW 2.3 A
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1305-AA02A-HAP has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-AA02A-HAP units instead of migration.

About 1305-AA02A-HAP

The 1305-AA02A-HAP is an Adjustable Frequency AC Drive manufactured by Allen-Bradley. This is the smallest Series C 1305 AC drive with an IP 30 enclosure, a 200 to 240 Volt AC Single Phase (1.2 A/0.19 kW) or 200 to 230 Volts AC three phase (2.3 A/0.37 kW) rating. The Programmer Only interface is installed on this model, which has an output frequency range of 0 to 400 Hertz. This device will be managed by control input signals, which will start and stop the motor. It has configurable inputs for 2 or 3 wire controls (start, stop, and forward/reverse functions), and furthermore, it has three configurable inputs of SW1, SW2, and SW3 for the control of seven preset speeds and two acceleration and deceleration times. This unit has one analog input at 0 to 10 Volts DC or 4 to 20 mA with a 10-bit resolution; its signal outputs can be configured as relay contacts or open collectors (sink) 24 Volts DC user supplied source voltage. One 8-bit analog output at 0 to 10 Volts DC is available. The 1305-AA02A-HAP output can be performed as a PWM algorithm, Volts per Hertz, or switching device 3-phase output. Start and run DC boosts can be conducted.



The input contactor should not be used for starting and stopping the motor and power supply switching should not occur more than once a minute. This module does not have a branch circuit protection. The recommended fuse sizes are 6 A for single phase inputs and 3 A for three phase inputs. Input and output power connections are made over a ten position terminal block. For single phase input, the AC input line should be connected to any two of the three input terminal positions. This module’s protective features include excessive temperature protection, over and under voltage protection, power and control ride through protection, and just ground and output short circuit protection. The 1305-AA02A-HAP dimensions are 120 x 195 x 122 millimeters (4.72 x 7.69 x 4.81 inches) and its shipping weight is approximately 1.6 kilograms (3.5 pounds). Its ambient temperature operating range is around 0 to 50 degrees Celsius.



Technical Description of 1305-AA02A-HAP

1305-AA02A-HAP 1305 AC Drives with IP 30 (NEMA Type 1) enclosure, 200-240V, Single Phase or 200-230V Three Phase rating and Programmer Only interface. English language
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1305-AA02A-HAP. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1305-AA02A-HAP. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1305-AA02A-HAP such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1305-AA02A-HAP Ser A
1305-AA02A-HAP/A, Series A, Rev A Request Quote

Common misspellings:
  • l305-AA02A-HAP
  • 13o5-AA02A-HAP
  • 1305-AAo2A-HAP
  • 1305AA02AHAP
PDF