1305-AA12A-HAP | Allen Bradley Drives 1305 AC Drives

1305-AA12A-HAP

Rated 4.6 with 11 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1305-AA12A-HAP

Revisions: Ser A Ser B Ser C 
Description: 1305-AA12A-HAP 1305 AC Drives with IP 30 (NEMA Type 1) enclosure, 200-240V, Single Phase or 200-230V Three Phase rating and Programmer Only interface. English language
Available Now
Request a quote for 1305-AA12A-HAP

Description: 1305-AA12A-HAP 1305 AC Drives with IP 30 (NEMA Type 1) enclosure, 200-240V, Single Phase or 200-230V Three Phase rating and Programmer Only interface. English language

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A Ser B Ser C 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1305-AA12A-HAP.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 11 reviews

    Technical Specifications for 1305-AA12A-HAP

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1305-AA12A-HAP
Product Line1305 AC Drives
Enclosure TypeIP 30 (NEMA Type 1)
Voltage200-240V, Single Phase or 200-230V Three Phase
Human Interface ModulesProgrammer Only
LanguageEnglish
Horsepower3 HP
Motor Rating (kW, Output Current)2.2 kW 12 A
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1305-AA12A-HAP has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-AA12A-HAP units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1305-AA12A-HAP
Product Line1305 AC Drives
Enclosure TypeIP 30 (NEMA Type 1)
Voltage200-240V, Single Phase or 200-230V Three Phase
Human Interface ModulesProgrammer Only
LanguageEnglish
Horsepower3 HP
Motor Rating (kW, Output Current)2.2 kW 12 A
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1305-AA12A-HAP has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-AA12A-HAP units instead of migration.

s

About 1305-AA12A-HAP

The Allen-Bradley 1305-AA12A-HAP Variable Frequency Drive is a programmable AC drive with logically-grouped programs and HMI features for efficient, easy, and convenient control of 3-phase motor speed. It has 2.2KW (3HP) output power, with 12A current, and an output voltage adjustable from 0 to the input voltage value of the drive, at a user-programmable frequency range between 0 and 400Hz. The 1305-AA12A-HAP draws 250mA maximum current from all ports, and it will dissipate 108W of heat when operational, at a drive efficiency of 97.5%. It has a 3-phase input voltage between 200 and 230V AC at 47-63Hz, with its operational range within 180 and 265V AC, also at 47-63 Hz, and it has an input power of 4.6KVA with a power factor of 0.8. The 1305-AA12A-HAP provides control via its 5V contact closure, with configurable inputs, and with a 1W, 10KΩ potentiometer. It has 4-20mA analog input with 250Ω input impedance at a 10-bit resolution, and 100Ω with the control voltage at 0-10V. The drive has 2 programmable control outputs (Relay Output1, and Open Collector Ouptut2), and a 0-10V DC analog output with a load impedance greater than 4000Ω at an 8-bit resolution. The 1305-AA12A-HAP drive’s output uses the sine weighted PWM, and it has a 100Hz incremental rate and a carrier frequency from 2-8 KHz. The drive provides 100% braking torque with an external resistor and it provides 150% overcurrent limiting for 60s and 200% limit for 2s. It offers motor overload protection, over-temperature protection, over and under voltage protection, and output short-circuits protection. The 1305-AA12A-HAP provides easy programming and monitoring, via its programmer and HMI and it can communicate with a PLC or SLC or any other programmable controller by using the optional 1203 communication module. The drive has an operational temperature, ranging between 0 and 50 oC, at a relative humidity of 0-90% without condensation, and it is designed to resist a 1G operational vibration. The 1305-AA12A-HAP has a volume of 210mm x 195mm x 184.1mm (8.27in x 7.68in x 7.87in) with a weight of 4.2Kg (9.2lb) and comes in a standard NEMA 1 (IP30)-rated enclosure.



Repair Services for 1305-AA12A-HAP

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1305-AA12A-HAP. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1305-AA12A-HAP

Please refer to the manual for more information about the 1305-AA12A-HAP such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1305-AA12A-HAP Ser A
1305-AA12A-HAP/A, Series A, Rev A Request Quote
1305-AA12A-HAP Ser B
1305-AA12A-HAP/B, Series B, Rev B Request Quote
1305-AA12A-HAP Ser C
1305-AA12A-HAP/C, Series C, Rev C Request Quote
Common misspellings:
  • l305-AA12A-HAP
  • 13o5-AA12A-HAP
  • 1305-AAl2A-HAP
  • 1305AA12AHAP

Dimensions For 1305-AA12A-HAP

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1305-AA12A-HAP

Width 8-1/4 in. (210 mm)
Height 7-11/16 in. (195 mm)
Depth w/o Pot. 7-1/16 in. (179 mm)
Depth w/ Pot. 7-7/8 in. (184.1 mm)
Weight 9.2 lb (4.2 kg)

Resolutions For 1305-AA12A-HAP

About

Technical Specifications for 1305-AA12A-HAP

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1305-AA12A-HAP
Product Line1305 AC Drives
Enclosure TypeIP 30 (NEMA Type 1)
Voltage200-240V, Single Phase or 200-230V Three Phase
Human Interface ModulesProgrammer Only
LanguageEnglish
Horsepower3 HP
Motor Rating (kW, Output Current)2.2 kW 12 A
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1305-AA12A-HAP
Product Line1305 AC Drives
Enclosure TypeIP 30 (NEMA Type 1)
Voltage200-240V, Single Phase or 200-230V Three Phase
Human Interface ModulesProgrammer Only
LanguageEnglish
Horsepower3 HP
Motor Rating (kW, Output Current)2.2 kW 12 A
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1305-AA12A-HAP has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-AA12A-HAP units instead of migration.

About 1305-AA12A-HAP

The Allen-Bradley 1305-AA12A-HAP Variable Frequency Drive is a programmable AC drive with logically-grouped programs and HMI features for efficient, easy, and convenient control of 3-phase motor speed. It has 2.2KW (3HP) output power, with 12A current, and an output voltage adjustable from 0 to the input voltage value of the drive, at a user-programmable frequency range between 0 and 400Hz. The 1305-AA12A-HAP draws 250mA maximum current from all ports, and it will dissipate 108W of heat when operational, at a drive efficiency of 97.5%. It has a 3-phase input voltage between 200 and 230V AC at 47-63Hz, with its operational range within 180 and 265V AC, also at 47-63 Hz, and it has an input power of 4.6KVA with a power factor of 0.8. The 1305-AA12A-HAP provides control via its 5V contact closure, with configurable inputs, and with a 1W, 10KΩ potentiometer. It has 4-20mA analog input with 250Ω input impedance at a 10-bit resolution, and 100Ω with the control voltage at 0-10V. The drive has 2 programmable control outputs (Relay Output1, and Open Collector Ouptut2), and a 0-10V DC analog output with a load impedance greater than 4000Ω at an 8-bit resolution. The 1305-AA12A-HAP drive’s output uses the sine weighted PWM, and it has a 100Hz incremental rate and a carrier frequency from 2-8 KHz. The drive provides 100% braking torque with an external resistor and it provides 150% overcurrent limiting for 60s and 200% limit for 2s. It offers motor overload protection, over-temperature protection, over and under voltage protection, and output short-circuits protection. The 1305-AA12A-HAP provides easy programming and monitoring, via its programmer and HMI and it can communicate with a PLC or SLC or any other programmable controller by using the optional 1203 communication module. The drive has an operational temperature, ranging between 0 and 50 oC, at a relative humidity of 0-90% without condensation, and it is designed to resist a 1G operational vibration. The 1305-AA12A-HAP has a volume of 210mm x 195mm x 184.1mm (8.27in x 7.68in x 7.87in) with a weight of 4.2Kg (9.2lb) and comes in a standard NEMA 1 (IP30)-rated enclosure.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1305-AA12A-HAP. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1305-AA12A-HAP. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1305-AA12A-HAP such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1305-AA12A-HAP Ser A
1305-AA12A-HAP/A, Series A, Rev A Request Quote
1305-AA12A-HAP Ser B
1305-AA12A-HAP/B, Series B, Rev B Request Quote
1305-AA12A-HAP Ser C
1305-AA12A-HAP/C, Series C, Rev C Request Quote

Common misspellings:
  • l305-AA12A-HAP
  • 13o5-AA12A-HAP
  • 1305-AAl2A-HAP
  • 1305AA12AHAP
PDF
Dimensions

Dimensions For 1305-AA12A-HAP

Width 8-1/4 in. (210 mm)
Height 7-11/16 in. (195 mm)
Depth w/o Pot. 7-1/16 in. (179 mm)
Depth w/ Pot. 7-7/8 in. (184.1 mm)
Weight 9.2 lb (4.2 kg)