1305-BA01A-HA1 | Allen Bradley Drives 1305 AC Drives

1305-BA01A-HA1

Rated 4.7 with 19 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1305-BA01A-HA1

Revisions: Ser A Ser B Ser C 
Description: The 1305-BA01A-HA1 AC drive has been designed and manufactured by Allen-Bradley/Rockwell Automation. It is part of the Allen-Bradley Bulletin 1305 series of industrial drives. The 1305-BA01A-HA1 AC drive features an English-language human-machine interface with an analog speed potentiometer. Its voltage rating is 380 to 460 Volts AC 3-phase voltage at 50 to 60 Hertz frequency. The 1305-BA01A-HA1 AC drive does not support 1-phase voltage like some of the other Bulletin 1305 series drives do.
Available Now
Request a quote for 1305-BA01A-HA1

Description: The 1305-BA01A-HA1 AC drive has been designed and manufactured by Allen-Bradley/Rockwell Automation. It is part of the Allen-Bradley Bulletin 1305 series of industrial drives. The 1305-BA01A-HA1 AC drive features an English-language human-machine interface with an analog speed potentiometer. Its voltage rating is 380 to 460 Volts AC 3-phase voltage at 50 to 60 Hertz frequency. The 1305-BA01A-HA1 AC drive does not support 1-phase voltage like some of the other Bulletin 1305 series drives do.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A Ser B Ser C 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1305-BA01A-HA1.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 19 reviews

    Technical Specifications for 1305-BA01A-HA1

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1305-BA01A-HA1
Product Line1305 AC Drives
Enclosure TypeIP 30 (NEMA Type 1)
Voltage380-460V, Three Phase
Human Interface ModulesHIM with Analog Speed Pot
LanguageEnglish
Horsepower.5 HP
Motor Rating (kW, Output Current).37 kW 1.3 A
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1305-BA01A-HA1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-BA01A-HA1 units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1305-BA01A-HA1
Product Line1305 AC Drives
Enclosure TypeIP 30 (NEMA Type 1)
Voltage380-460V, Three Phase
Human Interface ModulesHIM with Analog Speed Pot
LanguageEnglish
Horsepower.5 HP
Motor Rating (kW, Output Current).37 kW 1.3 A
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1305-BA01A-HA1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-BA01A-HA1 units instead of migration.

s

About 1305-BA01A-HA1

The Allen Bradley 1305-BA01A-HA1 is part of the Bulletin 1305 AC Drive series. This type of AC Drive is rated at 380 to 460 Volts. The three-phase AC induction motor for this design uses 0.37 kW (.5 HP) and has an output current of 1.3A. It has an adjustable output voltage starting at 0 Volts to the input voltage, a programmable output frequency from 0 to 400 Hertz and a maximum of 250 mA ScanPort load. Its voltage operation ranges between 340 and 500 Volts at 47 to 63 Hertz with input kVA of 0.9; additionally, it has a 97.5% efficiency rating, a displacement of 0.8 (lagging), and a power dissipation of 21 Watts.



The Allen Bradley 1305-BA01A has an IP30 (NEMA 1) enclosure type; while operational at 1.0 G vibrations and 0 to 50 degrees Celsius ambient temperature, 0 to 40 degrees Celsius if enclosures are included, its storage temperature ranges widely between -40 and 70 degrees Celsius with a non-condensing relative humidity of 0% to 95%.



The Allen Bradley 1305-BA01A-HA1 uses a contact closure or an internal 5 Volt supply for its control input type; the control input for start, stop, forward or reverse is configurable for 2 or 3 wire controls. The Jog control input is for momentary (non-maintained) input; SW1, SW2, and SW3 are configurable inputs for control of 7 preset speeds and 2 Acceleration/Deceleration times. The AC Dynamic Braking Torque is 100% without an external resistor and up to 150% if an external resistor is added; the machine weighs approximately 3.6 kilograms (8 pounds) and has dimensions of 170 x 195 x 179/184.1 millimeters with and without a potentiometer.



This content was written and compiled by D O Supply and should not be copied.

Technical Description of 1305-BA01A-HA1

1305-BA01A-HA1 1305 AC Drives with IP 30 (NEMA Type 1) enclosure, 380-460V, Three Phase rating and HIM with Analog Speed Pot interface. English language

Repair Services for 1305-BA01A-HA1

Type Lead Time Price Action
Repair Service 2-4 weeks $803cartAdd to Cart

Our highly skilled technicians can repair your 1305-BA01A-HA1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1305-BA01A-HA1

Please refer to the manual for more information about the 1305-BA01A-HA1 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1305-BA01A-HA1 Ser A
1305-BA01A-HA1/A, Series A, Rev A Request Quote
1305-BA01A-HA1 Ser B
1305-BA01A-HA1/B, Series B, Rev B Request Quote
1305-BA01A-HA1 Ser C
1305-BA01A-HA1/C, Series C, Rev C Request Quote
Common misspellings:
  • l305-BA01A-HA1
  • 13o5-BA01A-HA1
  • 1305-8A01A-HA1
  • 1305-BAo1A-HA1
  • 1305-BA0lA-HA1
  • 1305-BA01A-HAl
  • 1305BA01AHA1

Dimensions For 1305-BA01A-HA1

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1305-BA01A-HA1

Width 6-11/16 in. (170 mm)
Height 7-11/16 in. (195 mm)
Depth w/o Pot. 7-1/4 in. (179 mm)
Depth w/ Pot. 7-1/4 in. (184.1 mm)
Weight 8.0 lb (3.6 kg)

Resolutions For 1305-BA01A-HA1

About

Technical Specifications for 1305-BA01A-HA1

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1305-BA01A-HA1
Product Line1305 AC Drives
Enclosure TypeIP 30 (NEMA Type 1)
Voltage380-460V, Three Phase
Human Interface ModulesHIM with Analog Speed Pot
LanguageEnglish
Horsepower.5 HP
Motor Rating (kW, Output Current).37 kW 1.3 A
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1305-BA01A-HA1
Product Line1305 AC Drives
Enclosure TypeIP 30 (NEMA Type 1)
Voltage380-460V, Three Phase
Human Interface ModulesHIM with Analog Speed Pot
LanguageEnglish
Horsepower.5 HP
Motor Rating (kW, Output Current).37 kW 1.3 A
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1305-BA01A-HA1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-BA01A-HA1 units instead of migration.

About 1305-BA01A-HA1

The Allen Bradley 1305-BA01A-HA1 is part of the Bulletin 1305 AC Drive series. This type of AC Drive is rated at 380 to 460 Volts. The three-phase AC induction motor for this design uses 0.37 kW (.5 HP) and has an output current of 1.3A. It has an adjustable output voltage starting at 0 Volts to the input voltage, a programmable output frequency from 0 to 400 Hertz and a maximum of 250 mA ScanPort load. Its voltage operation ranges between 340 and 500 Volts at 47 to 63 Hertz with input kVA of 0.9; additionally, it has a 97.5% efficiency rating, a displacement of 0.8 (lagging), and a power dissipation of 21 Watts.



The Allen Bradley 1305-BA01A has an IP30 (NEMA 1) enclosure type; while operational at 1.0 G vibrations and 0 to 50 degrees Celsius ambient temperature, 0 to 40 degrees Celsius if enclosures are included, its storage temperature ranges widely between -40 and 70 degrees Celsius with a non-condensing relative humidity of 0% to 95%.



The Allen Bradley 1305-BA01A-HA1 uses a contact closure or an internal 5 Volt supply for its control input type; the control input for start, stop, forward or reverse is configurable for 2 or 3 wire controls. The Jog control input is for momentary (non-maintained) input; SW1, SW2, and SW3 are configurable inputs for control of 7 preset speeds and 2 Acceleration/Deceleration times. The AC Dynamic Braking Torque is 100% without an external resistor and up to 150% if an external resistor is added; the machine weighs approximately 3.6 kilograms (8 pounds) and has dimensions of 170 x 195 x 179/184.1 millimeters with and without a potentiometer.



This content was written and compiled by D O Supply and should not be copied.

Technical Description of 1305-BA01A-HA1

1305-BA01A-HA1 1305 AC Drives with IP 30 (NEMA Type 1) enclosure, 380-460V, Three Phase rating and HIM with Analog Speed Pot interface. English language
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $803cartAdd to Cart

Our highly skilled technicians can repair your 1305-BA01A-HA1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $803cartAdd to Cart

Our highly skilled technicians can repair your 1305-BA01A-HA1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1305-BA01A-HA1 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1305-BA01A-HA1 Ser A
1305-BA01A-HA1/A, Series A, Rev A Request Quote
1305-BA01A-HA1 Ser B
1305-BA01A-HA1/B, Series B, Rev B Request Quote
1305-BA01A-HA1 Ser C
1305-BA01A-HA1/C, Series C, Rev C Request Quote

Common misspellings:
  • l305-BA01A-HA1
  • 13o5-BA01A-HA1
  • 1305-8A01A-HA1
  • 1305-BAo1A-HA1
  • 1305-BA0lA-HA1
  • 1305-BA01A-HAl
  • 1305BA01AHA1
PDF
Dimensions

Dimensions For 1305-BA01A-HA1

Width 6-11/16 in. (170 mm)
Height 7-11/16 in. (195 mm)
Depth w/o Pot. 7-1/4 in. (179 mm)
Depth w/ Pot. 7-1/4 in. (184.1 mm)
Weight 8.0 lb (3.6 kg)