The 1305-BA02A-DE-HA2 drive is an adjustable frequency drive by Allen-Bradley. This programmable drive has a current rating of 2 Amps and an input voltage of 380 to 460 Volts AC, with the German language as its default language. It is designed and intended for the speed control of 3-phase induction motors with a standard IP 30, NEMA 1 enclosure rating. The drive features a nominal output current of 1.6 Amps, as well as a variable output voltage range from 0 to the rated input value. The 1305-BA02A-DE-HA2 drive has an output power rating of 0.55 kilowatts, 3 kilowatts, or 4 Horsepower. It has a digital HMI with up and down keys. The output frequency of the Allen Bradley 1305-BA02A-DE-HA2 drive is programmable between 0 and 400 hertz and it has a maximum port current draw of 250 milliamps. Its frequency at an input voltage of 340 to 500 Volts AC is 47 to 63 Hertz, with 1.3 kilovolts of input power, as well as an efficiency of 97.5% with a power factor of 0.8.

The 1305-BA02A-DE-HA2 drive has a maximum power dissipation of 27 Watts and is intended for use at 0 to 50 degrees Celsius of ambient temperature at a non-condensing relative humidity of 0 to 90%. The Allen-Bradley 1305-BA02A-DE-HA2 drive uses a 5 Volts DC contact closure control input to provide motor control and the basic start, stop, reverse, and forward control configured for 2-wire or 3-wire control. It features a sine weighted PWM output and it uses the IGBT intelligent power unit for output switching of the 3-phase devices. The drive uses an external resistor to provide a dynamic braking rating of approximately 150%. It can also provide up to 150% of the current limiting for 60 seconds.