1305-BA04A-ES-HAP | Allen Bradley Drives 1305 AC Drives

1305-BA04A-ES-HAP

Rated 4.8 with 20 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1305-BA04A-ES-HAP

Description: The Allen-Bradley 1305-BA04A-ES-HAP variable frequency drive has a programmable Relay Control Output 1 rating is 5 Amps and it has 2 Amps of inductive rating at 30 Volts DC or 115 Volts AC. It uses a power supply of 380 to 460 Volts AC at 50 to 60 Hertz frequency with 3.1 KVA of apparent nput power, an IP 30, NEMA Type 1 enclosure rating and Spanish language programming.
Available Now
Request a quote for 1305-BA04A-ES-HAP

Description:

The Allen-Bradley 1305-BA04A-ES-HAP variable frequency drive has a programmable Relay Control Output 1 rating is 5 Amps and it has 2 Amps of inductive rating at 30 Volts DC or 115 Volts AC. It uses a power supply of 380 to 460 Volts AC at 50 to 60 Hertz frequency with 3.1 KVA of apparent nput power, an IP 30, NEMA Type 1 enclosure rating and Spanish language programming.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1305-BA04A-ES-HAP.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 20 reviews

    Technical Specifications for 1305-BA04A-ES-HAP

BrandAllen-Bradley / Rockwell Automation
Series1305 AC Drives
Part Number1305-BA04A-ES-HAP
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1305-BA04A-ES-HAP has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-BA04A-ES-HAP units instead of migration.

BrandAllen-Bradley / Rockwell Automation
Series1305 AC Drives
Part Number1305-BA04A-ES-HAP
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1305-BA04A-ES-HAP has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-BA04A-ES-HAP units instead of migration.

s

About 1305-BA04A-ES-HAP

Allen-Bradley manufactures the 1305-BA04A-ES-HAP Variable Frequency Drive. It is a programmable AC drive intended to provide a control solution for the speed of 3-phase induction motors. It features an output power rating of 1.5 kilowatts or 2 Horsepower with an output current of 4 Amps as well as drive adjustable output voltage from 0 to a typical input voltage rating of 460 Volts AC at a programmed input frequency range of 0 to 400 hertz. It is programmed in the Spanish language and features an IP 30, NEMA Type 1 enclosure type rating. This drive has a maximum draw load of 250 milliamps on all its ports, and when it is in operation, it dissipates 52 Watts as heat. The 1305-BA04A-ES-HAP AC drive has an input efficiency rating of 97.5% and operates on a power supply voltage range of 380 to 460 Volts AC at 50 to 60 Hertz frequency with 3.1KVA of apparent input power. This drive features a configurable contact closure input of 5 Volts DC with configurable inputs for start, reverse/forward, and stop control as well as 2 analog inputs with 250 ohms and 100 ohms rated load limits at a 10-bit resolution.



 



The Allen-Bradley 1305-BA04A-ES-HAP variable frequency drive has a 5 Amps programmable relay control Output 1 rating and it has 2 Amps of inductive rating at 30 Volts DC or 115 Volts AC. It has an 8-bit resolution load capacity of more than 4000 ohms and it provides modulation signal frequency with the sine weighted pulse width algorithm. The 1305-BA04A-ES-HAP drive provides a 150% braking torque via an external resistor but it has the capacity of 50% dynamic braking without an external resistor. It also has a programmable current limiting capacity range from 20 to 150% of the full current load for 60 seconds and 200% of the full current load for 2 seconds.



Repair Services for 1305-BA04A-ES-HAP

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1305-BA04A-ES-HAP. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 1305-BA04A-ES-HAP

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1305-BA04A-ES-HAP

Width 6-11/16 in. (170 mm)
Height 7-11/16 in. (195 mm)
Depth w/o Pot. 7-1/4 in. (179 mm)
Depth w/ Pot. 7-1/4 in. (184.1 mm)
Weight 8.0 lb (3.6 kg)

Resolutions For 1305-BA04A-ES-HAP

About

Technical Specifications for 1305-BA04A-ES-HAP

BrandAllen-Bradley / Rockwell Automation
Series1305 AC Drives
Part Number1305-BA04A-ES-HAP
Product Lifecycle Status*Discontinued/Obsolete
BrandAllen-Bradley / Rockwell Automation
Series1305 AC Drives
Part Number1305-BA04A-ES-HAP
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1305-BA04A-ES-HAP has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-BA04A-ES-HAP units instead of migration.

About 1305-BA04A-ES-HAP

Allen-Bradley manufactures the 1305-BA04A-ES-HAP Variable Frequency Drive. It is a programmable AC drive intended to provide a control solution for the speed of 3-phase induction motors. It features an output power rating of 1.5 kilowatts or 2 Horsepower with an output current of 4 Amps as well as drive adjustable output voltage from 0 to a typical input voltage rating of 460 Volts AC at a programmed input frequency range of 0 to 400 hertz. It is programmed in the Spanish language and features an IP 30, NEMA Type 1 enclosure type rating. This drive has a maximum draw load of 250 milliamps on all its ports, and when it is in operation, it dissipates 52 Watts as heat. The 1305-BA04A-ES-HAP AC drive has an input efficiency rating of 97.5% and operates on a power supply voltage range of 380 to 460 Volts AC at 50 to 60 Hertz frequency with 3.1KVA of apparent input power. This drive features a configurable contact closure input of 5 Volts DC with configurable inputs for start, reverse/forward, and stop control as well as 2 analog inputs with 250 ohms and 100 ohms rated load limits at a 10-bit resolution.



 



The Allen-Bradley 1305-BA04A-ES-HAP variable frequency drive has a 5 Amps programmable relay control Output 1 rating and it has 2 Amps of inductive rating at 30 Volts DC or 115 Volts AC. It has an 8-bit resolution load capacity of more than 4000 ohms and it provides modulation signal frequency with the sine weighted pulse width algorithm. The 1305-BA04A-ES-HAP drive provides a 150% braking torque via an external resistor but it has the capacity of 50% dynamic braking without an external resistor. It also has a programmable current limiting capacity range from 20 to 150% of the full current load for 60 seconds and 200% of the full current load for 2 seconds.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1305-BA04A-ES-HAP. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1305-BA04A-ES-HAP. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF
Dimensions

Dimensions For 1305-BA04A-ES-HAP

Width 6-11/16 in. (170 mm)
Height 7-11/16 in. (195 mm)
Depth w/o Pot. 7-1/4 in. (179 mm)
Depth w/ Pot. 7-1/4 in. (184.1 mm)
Weight 8.0 lb (3.6 kg)