1305-BA06A-HA1 | Allen Bradley Drives 1305 AC Drives

1305-BA06A-HA1

Rated 5 with 15 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1305-BA06A-HA1

Revisions: Ser A Ser B Ser C 
Description: This 1305 AC Drive has a voltage rating of 380-460V, Three Phase and is a 3 HP with 2.2 kW 6 A Output current. This Drive has an English language module and HIM with Analog Speed Pot.
Available Now
Request a quote for 1305-BA06A-HA1

Description: This 1305 AC Drive has a voltage rating of 380-460V, Three Phase and is a 3 HP with 2.2 kW 6 A Output current. This Drive has an English language module and HIM with Analog Speed Pot.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A Ser B Ser C 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1305-BA06A-HA1.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 15 reviews

    Technical Specifications for 1305-BA06A-HA1

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1305-BA06A-HA1
Product Line1305 AC Drives
Enclosure TypeIP 30 (NEMA Type 1)
Voltage380-460V, Three Phase
Human Interface ModulesHIM with Analog Speed Pot
LanguageEnglish
Horsepower3 HP
Motor Rating (kW, Output Current)2.2 kW 6 A
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1305-BA06A-HA1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-BA06A-HA1 units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1305-BA06A-HA1
Product Line1305 AC Drives
Enclosure TypeIP 30 (NEMA Type 1)
Voltage380-460V, Three Phase
Human Interface ModulesHIM with Analog Speed Pot
LanguageEnglish
Horsepower3 HP
Motor Rating (kW, Output Current)2.2 kW 6 A
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1305-BA06A-HA1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-BA06A-HA1 units instead of migration.

s

About 1305-BA06A-HA1

The Allen-Bradley 1305-BA06A-HA1 is an analog speed potentiometer and a human interface module. It has a nominal current of 2.2kW or 3 HP and it has a 3-phase motor type. The output current for the drive amp is 6A and it is also 6A in the bypass current if a bypass amp is purchased. The output current differs for each given input voltage. The 1305-BA06A-HA1 has a programmable output frequency which ranges from 0-400 Hz. The ScanPort load is 250 mA maximum if all adapters are combined. The input rating has values for input voltage which is 380-460V AC 3-phase and its input frequency is 50-60 Hz. The input voltage is 340-500V AC at 47-63Hz. The input kVA is 4.6 and it has a 97.5% efficiency rating. The 1305-BA06A-HA1 has a 73-Watt power dissipation.

The 1305-BA06A-HA1 It uses a general type IP30 or NEMA 1 enclosure. The current limit stabilizes operation for the drive and motor protection and it is 150% for every 60 seconds and 200% for every 2 seconds. The AC dynamic braking torque, without an external resistor, is only at 50% but with an external resistor, it is at 100%. The dimensions of the equipment are as follows: 210mm (8-1/4in) by 195mm (7-11/16in) by 179mm (7-1/16in) and it weighs up to 3.6 kg (8lb). The adapters connected to the 1305-BA06A-HA1 drive must not draw a current that exceeds 250mA. 



Repair Services for 1305-BA06A-HA1

Type Lead Time Price Action
Repair Service 2-4 weeks $2194cartAdd to Cart

Our highly skilled technicians can repair your 1305-BA06A-HA1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1305-BA06A-HA1

Please refer to the manual for more information about the 1305-BA06A-HA1 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1305-BA06A-HA1 Ser A
1305-BA06A-HA1/A, Series A, Rev A Request Quote
1305-BA06A-HA1 Ser B
1305-BA06A-HA1/B, Series B, Rev B Request Quote
1305-BA06A-HA1 Ser C
1305-BA06A-HA1/C, Series C, Rev C Request Quote
Common misspellings:
  • l305-BA06A-HA1
  • 13o5-BA06A-HA1
  • 1305-8A06A-HA1
  • 1305-BAo6A-HA1
  • 1305-BA06A-HAl
  • 1305BA06AHA1

Dimensions For 1305-BA06A-HA1

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1305-BA06A-HA1

Width 6-11/16 in. (170 mm)
Height 7-11/16 in. (195 mm)
Depth w/o Pot. 7-1/4 in. (179 mm)
Depth w/ Pot. 7-1/4 in. (184.1 mm)
Weight 8.0 lb (3.6 kg)

Resolutions For 1305-BA06A-HA1

About

Technical Specifications for 1305-BA06A-HA1

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1305-BA06A-HA1
Product Line1305 AC Drives
Enclosure TypeIP 30 (NEMA Type 1)
Voltage380-460V, Three Phase
Human Interface ModulesHIM with Analog Speed Pot
LanguageEnglish
Horsepower3 HP
Motor Rating (kW, Output Current)2.2 kW 6 A
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1305-BA06A-HA1
Product Line1305 AC Drives
Enclosure TypeIP 30 (NEMA Type 1)
Voltage380-460V, Three Phase
Human Interface ModulesHIM with Analog Speed Pot
LanguageEnglish
Horsepower3 HP
Motor Rating (kW, Output Current)2.2 kW 6 A
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1305-BA06A-HA1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-BA06A-HA1 units instead of migration.

About 1305-BA06A-HA1

The Allen-Bradley 1305-BA06A-HA1 is an analog speed potentiometer and a human interface module. It has a nominal current of 2.2kW or 3 HP and it has a 3-phase motor type. The output current for the drive amp is 6A and it is also 6A in the bypass current if a bypass amp is purchased. The output current differs for each given input voltage. The 1305-BA06A-HA1 has a programmable output frequency which ranges from 0-400 Hz. The ScanPort load is 250 mA maximum if all adapters are combined. The input rating has values for input voltage which is 380-460V AC 3-phase and its input frequency is 50-60 Hz. The input voltage is 340-500V AC at 47-63Hz. The input kVA is 4.6 and it has a 97.5% efficiency rating. The 1305-BA06A-HA1 has a 73-Watt power dissipation.

The 1305-BA06A-HA1 It uses a general type IP30 or NEMA 1 enclosure. The current limit stabilizes operation for the drive and motor protection and it is 150% for every 60 seconds and 200% for every 2 seconds. The AC dynamic braking torque, without an external resistor, is only at 50% but with an external resistor, it is at 100%. The dimensions of the equipment are as follows: 210mm (8-1/4in) by 195mm (7-11/16in) by 179mm (7-1/16in) and it weighs up to 3.6 kg (8lb). The adapters connected to the 1305-BA06A-HA1 drive must not draw a current that exceeds 250mA. 



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $2194cartAdd to Cart

Our highly skilled technicians can repair your 1305-BA06A-HA1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $2194cartAdd to Cart

Our highly skilled technicians can repair your 1305-BA06A-HA1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1305-BA06A-HA1 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1305-BA06A-HA1 Ser A
1305-BA06A-HA1/A, Series A, Rev A Request Quote
1305-BA06A-HA1 Ser B
1305-BA06A-HA1/B, Series B, Rev B Request Quote
1305-BA06A-HA1 Ser C
1305-BA06A-HA1/C, Series C, Rev C Request Quote

Common misspellings:
  • l305-BA06A-HA1
  • 13o5-BA06A-HA1
  • 1305-8A06A-HA1
  • 1305-BAo6A-HA1
  • 1305-BA06A-HAl
  • 1305BA06AHA1
PDF
Dimensions

Dimensions For 1305-BA06A-HA1

Width 6-11/16 in. (170 mm)
Height 7-11/16 in. (195 mm)
Depth w/o Pot. 7-1/4 in. (179 mm)
Depth w/ Pot. 7-1/4 in. (184.1 mm)
Weight 8.0 lb (3.6 kg)