DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1305-BA09A-DE. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1305-BA09A-DE |
Product Line | 1305 AC Drives |
Enclosure Type | IP 30 (NEMA Type 1) |
Voltage | 380-460V, Three Phase |
Human Interface Modules | No HIM |
Language | German |
Horsepower | 5 HP |
Motor Rating (kW, Output Current) | 4 kW 9 A |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1305-BA09A-DE has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-BA09A-DE units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1305-BA09A-DE |
Product Line | 1305 AC Drives |
Enclosure Type | IP 30 (NEMA Type 1) |
Voltage | 380-460V, Three Phase |
Human Interface Modules | No HIM |
Language | German |
Horsepower | 5 HP |
Motor Rating (kW, Output Current) | 4 kW 9 A |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1305-BA09A-DE has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-BA09A-DE units instead of migration.
sThe 1305-BA09A-DE Variable Frequency Drive is a 9A, 300-460V AC (3-phase) drive with German Language features for control of 3-phase induction motor speed. It has 4KW (5HP) output power, with 9A input current, and a modifiable output voltage ranging from 0-460V AC, at a programmable inline frequency of 0-400Hz. The 1305-BA09A-DE has a port load of 250mA load and it disperses 107W heat when operational. The drive’s efficiency 97.5% and it requires an input power source with 3-phase 380-460V AC input voltage at 50-60Hz, and with 340-500V AC as its operating voltage range, and 7KVA apparent input power. It makes use of the 5V DC contact closure input with 1W, 10KΩ potentiometer, and the drive’s control circuit has 2 analog inputs with 250Ω and 100Ω impedance at 10-bit and 8-bit resolutions. The 1305-BA09A-DE has a programmable, control relay output 1, with 30V DC/115V AC, 2A inductive rating, and 30V DC/115V AC, 5A resistive ratings, and with a 24V DC, 50mA (sinking) open collector output 2.
The 1305-BA09A-DE comes with an 8-bit analog output with >4000Ω load impedance, and it makes use of the sine weighted PWW algorithm for signal control. The drive has a V/Hz ratio that is programmable, and a selectable carrier frequency from 2-8 KHz (adjustable through 100Hz). The 1305-BA09A-DE has 100%, AC dynamic braking torque with an external resistor but will provide 20% torque without an external resistor and it is built to provide 150% programmable current limiting for 60s and 200% for 2s. It renders over-temperature protection under and overvoltage protection, motor overload protection, and short-circuit protection. The 1305-BA09A-DE is capable of displaying the drive’s information and it can be programmed in German alongside its base English language. It is built to operate at an ambient range of 0-50 oC, at 0-95% non-condensing humidity limits, and it can be installed at a maximum altitude of 1,000m (3,300ft) without de-rating. The 1305-BA09A-DE weighs about 4.2Kg (9.2lb) and it has dimensions of 210mm x 195mm x 184.1mm (8.27in x 7.68in x 7.87in).
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $2366 | ![]() |
Our highly skilled technicians can repair your 1305-BA09A-DE. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1305-BA09A-DE such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1305-BA09A-DE Ser A
|
1305-BA09A-DE/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Width | 8-1/4 in. (210 mm) |
Height | 7-11/16 in. (195 mm) |
Depth w/o Pot. | 7-1/16 in. (179 mm) |
Depth w/ Pot. | 7-7/8 in. (184.1 mm) |
Weight | 9.2 lb (4.2 kg) |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1305-BA09A-DE |
Product Line | 1305 AC Drives |
Enclosure Type | IP 30 (NEMA Type 1) |
Voltage | 380-460V, Three Phase |
Human Interface Modules | No HIM |
Language | German |
Horsepower | 5 HP |
Motor Rating (kW, Output Current) | 4 kW 9 A |
Product Lifecycle Status* | Discontinued/Obsolete |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1305-BA09A-DE |
Product Line | 1305 AC Drives |
Enclosure Type | IP 30 (NEMA Type 1) |
Voltage | 380-460V, Three Phase |
Human Interface Modules | No HIM |
Language | German |
Horsepower | 5 HP |
Motor Rating (kW, Output Current) | 4 kW 9 A |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1305-BA09A-DE has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-BA09A-DE units instead of migration.
The 1305-BA09A-DE Variable Frequency Drive is a 9A, 300-460V AC (3-phase) drive with German Language features for control of 3-phase induction motor speed. It has 4KW (5HP) output power, with 9A input current, and a modifiable output voltage ranging from 0-460V AC, at a programmable inline frequency of 0-400Hz. The 1305-BA09A-DE has a port load of 250mA load and it disperses 107W heat when operational. The drive’s efficiency 97.5% and it requires an input power source with 3-phase 380-460V AC input voltage at 50-60Hz, and with 340-500V AC as its operating voltage range, and 7KVA apparent input power. It makes use of the 5V DC contact closure input with 1W, 10KΩ potentiometer, and the drive’s control circuit has 2 analog inputs with 250Ω and 100Ω impedance at 10-bit and 8-bit resolutions. The 1305-BA09A-DE has a programmable, control relay output 1, with 30V DC/115V AC, 2A inductive rating, and 30V DC/115V AC, 5A resistive ratings, and with a 24V DC, 50mA (sinking) open collector output 2.
The 1305-BA09A-DE comes with an 8-bit analog output with >4000Ω load impedance, and it makes use of the sine weighted PWW algorithm for signal control. The drive has a V/Hz ratio that is programmable, and a selectable carrier frequency from 2-8 KHz (adjustable through 100Hz). The 1305-BA09A-DE has 100%, AC dynamic braking torque with an external resistor but will provide 20% torque without an external resistor and it is built to provide 150% programmable current limiting for 60s and 200% for 2s. It renders over-temperature protection under and overvoltage protection, motor overload protection, and short-circuit protection. The 1305-BA09A-DE is capable of displaying the drive’s information and it can be programmed in German alongside its base English language. It is built to operate at an ambient range of 0-50 oC, at 0-95% non-condensing humidity limits, and it can be installed at a maximum altitude of 1,000m (3,300ft) without de-rating. The 1305-BA09A-DE weighs about 4.2Kg (9.2lb) and it has dimensions of 210mm x 195mm x 184.1mm (8.27in x 7.68in x 7.87in).
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $2366 | ![]() |
Our highly skilled technicians can repair your 1305-BA09A-DE. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $2366 | ![]() |
Our highly skilled technicians can repair your 1305-BA09A-DE. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1305-BA09A-DE such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1305-BA09A-DE Ser A
|
1305-BA09A-DE/A, Series A, Rev A | Request Quote |
Width | 8-1/4 in. (210 mm) |
Height | 7-11/16 in. (195 mm) |
Depth w/o Pot. | 7-1/16 in. (179 mm) |
Depth w/ Pot. | 7-7/8 in. (184.1 mm) |
Weight | 9.2 lb (4.2 kg) |