DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1336-CAP-SP2A. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1336-CAP-SP2A |
Description | Capacitor |
Horsepower | 15-20 HP |
Voltage | 460 VAC |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-CAP-SP2A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-CAP-SP2A units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1336-CAP-SP2A |
Description | Capacitor |
Horsepower | 15-20 HP |
Voltage | 460 VAC |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-CAP-SP2A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-CAP-SP2A units instead of migration.
sThe 1336-CAP-SP2A is a two terminal electrical component capacitor manufactured by Allen-Bradley to store energy and give power to Allen-Bradley 1336 drive series gadgets. It suitably functions in Allen-Bradley 1336 drives that run on 15 to 20 Horsepower; it stores and runs on 460 Volts AC. It is applicable in a separate thermal overload relay connection to the control circuit. When the 1336-CAP-SP2A discharges, its essential impedance is zero. For switching it to the adequate impedance, it should connect in series with the capacitor bank to limit the inrush current. Adding inductance in the capacitor’s conductors is one way of limiting the surge current. It can be achieved by making coils in the power connections to the capacitor.
The 1336-CAP-SP2A electrical component capacitor comes with a 250 Volts 6-inch diameter coil, and using six loops with it is recommendable. The 1336-CAP-SP2A can also use a 480 Volts to 600 Volts 6-inch diameter coil and it is preferable for this diameter coil to have eight loops available. Take precautions while mounting the coils to prevent the loops from being stacked directly on top of one another because this may cause a canceling effect. It is also recommended to fit the coils on insulated supports and away from the metal parts to prevent them from acting like induction heaters. Place the capacitor in front of the contractor when using the isolation contactor.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Please refer to the manual for more information about the 1336-CAP-SP2A such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336-CAP-SP2A Ser A
|
1336-CAP-SP2A/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1336-CAP-SP2A |
Description | Capacitor |
Horsepower | 15-20 HP |
Voltage | 460 VAC |
Product Lifecycle Status* | Discontinued/Obsolete |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1336-CAP-SP2A |
Description | Capacitor |
Horsepower | 15-20 HP |
Voltage | 460 VAC |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-CAP-SP2A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-CAP-SP2A units instead of migration.
The 1336-CAP-SP2A is a two terminal electrical component capacitor manufactured by Allen-Bradley to store energy and give power to Allen-Bradley 1336 drive series gadgets. It suitably functions in Allen-Bradley 1336 drives that run on 15 to 20 Horsepower; it stores and runs on 460 Volts AC. It is applicable in a separate thermal overload relay connection to the control circuit. When the 1336-CAP-SP2A discharges, its essential impedance is zero. For switching it to the adequate impedance, it should connect in series with the capacitor bank to limit the inrush current. Adding inductance in the capacitor’s conductors is one way of limiting the surge current. It can be achieved by making coils in the power connections to the capacitor.
The 1336-CAP-SP2A electrical component capacitor comes with a 250 Volts 6-inch diameter coil, and using six loops with it is recommendable. The 1336-CAP-SP2A can also use a 480 Volts to 600 Volts 6-inch diameter coil and it is preferable for this diameter coil to have eight loops available. Take precautions while mounting the coils to prevent the loops from being stacked directly on top of one another because this may cause a canceling effect. It is also recommended to fit the coils on insulated supports and away from the metal parts to prevent them from acting like induction heaters. Place the capacitor in front of the contractor when using the isolation contactor.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Please refer to the manual for more information about the 1336-CAP-SP2A such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336-CAP-SP2A Ser A
|
1336-CAP-SP2A/A, Series A, Rev A | Request Quote |