DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1336-CAP-SP3-A. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-CAP-SP3-A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-CAP-SP3-A units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-CAP-SP3-A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-CAP-SP3-A units instead of migration.
sThe Allen-Bradley 1336-CAP-SP3-A is a Series A bus capacitor assembly that is compatible with the 1336 series of adjustable frequency drives. It has a voltage rating of 460V and HP ranging from 25 to 30 HP. Note that the 1336-CAP-SP3-A is specifically used for IMPACT, FORCE, and PLUS drives. These 1336 drives have input power ratings that range from 200 to 600V, 0.37 to 597 kW, and 0.5 to 800 HP and a heavy-duty overload capability of 150% for 60 seconds. The output power carrier frequencies of this drive are from 1 to 12 kHz and their output frequencies range from 0 to 400 Hz. The 1336-CAP-SP3-A can operate at room temperatures ranging from either 0 to 40 °C or 0 to 50 °C, depending on their enclosure ratings, and it can be stored at a -40 to 70 °C temperature range.
These 1336 drives that users can install the 1336-CAP-SP3-A assembly on are used for both general performance and high-performance operations. 1336 PLUS drives are suitable for general performance operations, while the 1336 FORCE and IMPACT drives are for high-performance operations. They all feature a non-programmable input located at the drive’s Terminal 30 for its hardware enable, which is vital for starting the drive because it will not run if this input is not detected. When this input is disrupted by opening it, the 1336-CAP-SP3-A drive’s output will shut off and it will undergo a ‘coast to stop’ instead of following the stop mode that has been programmed. Protective features of these drives include protection for output short circuits, motor overload, under and overvoltage, and output ground faults.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-CAP-SP3-A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1336-CAP-SP3-A such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336-CAP-SP3-A Ser A
|
1336-CAP-SP3-A/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336-CAP-SP3-A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-CAP-SP3-A units instead of migration.
The Allen-Bradley 1336-CAP-SP3-A is a Series A bus capacitor assembly that is compatible with the 1336 series of adjustable frequency drives. It has a voltage rating of 460V and HP ranging from 25 to 30 HP. Note that the 1336-CAP-SP3-A is specifically used for IMPACT, FORCE, and PLUS drives. These 1336 drives have input power ratings that range from 200 to 600V, 0.37 to 597 kW, and 0.5 to 800 HP and a heavy-duty overload capability of 150% for 60 seconds. The output power carrier frequencies of this drive are from 1 to 12 kHz and their output frequencies range from 0 to 400 Hz. The 1336-CAP-SP3-A can operate at room temperatures ranging from either 0 to 40 °C or 0 to 50 °C, depending on their enclosure ratings, and it can be stored at a -40 to 70 °C temperature range.
These 1336 drives that users can install the 1336-CAP-SP3-A assembly on are used for both general performance and high-performance operations. 1336 PLUS drives are suitable for general performance operations, while the 1336 FORCE and IMPACT drives are for high-performance operations. They all feature a non-programmable input located at the drive’s Terminal 30 for its hardware enable, which is vital for starting the drive because it will not run if this input is not detected. When this input is disrupted by opening it, the 1336-CAP-SP3-A drive’s output will shut off and it will undergo a ‘coast to stop’ instead of following the stop mode that has been programmed. Protective features of these drives include protection for output short circuits, motor overload, under and overvoltage, and output ground faults.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-CAP-SP3-A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336-CAP-SP3-A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1336-CAP-SP3-A such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336-CAP-SP3-A Ser A
|
1336-CAP-SP3-A/A, Series A, Rev A | Request Quote |