The 1336T-GT1-SP34B is a PLC communication adapter for the 1336T series of adjustable frequency AC drives. The drives are from the Force series and this adapter is a spare part for the drives. The 1336T-GT1-SP34B adapter is a Series B adapter and the version number of the adapter is 3.03. The board must be installed or replaced by people familiar with the 1336 Force drives and they should plan the installation and the maintenance of the drive by taking into consideration the other systems. The installations should be done correctly and according to the instructions in the troubleshooting manuals. Incorrect installation may damage the associated components and the other peripheral devices.

The 1336T-GT1-SP34B board is sensitive to Electrostatic discharge (ESD) and it is extremely important to take precautions to prevent ESD while installing or replacing the board. Users can refer to the static control guidelines by Allen-Bradley for guarding against electrostatic damage or they can refer to any other applicable ESD protection handbook. It is important to make sure that the drive is installed in an environment where the ambient operating temperature is between 0 and 40 degrees Celsius. The connections should be made when the power supply to the device is turned off in order to prevent any damage due to electric shock and injury. Users can refer to the installation manual and become familiar with the system before doing the replacement. Users should install the 1336T-GT1-SP34B drive to comply with the national and local electrical codes. Users can contact the local support team or the manufacturer for any further assistance.