1336T-GT1-SP51A

The 1336T-GT1-SP51A is a series A PLC Communications Adapter for all frames made by Allen Bradley. It is version 5.01 and comes with an English LM. The PLC communications adapter PCB offers four analog inputs and four analog outputs. It has two selectable RIO/DH communications channels. The 1336T-GT1-SP51A is compatible with all frames of 1336 PLUS, PLUS II, IMPACT, FORCE, and REGEN drives from Allen Bradley. Its dimensions are 40 by 30 by 12 centimeters and it weighs is 2 kilograms. Keep in mind that 1336 drives contain electrostatic discharge sensitive components. It is important to maintain proper static control precautions when removing, replacing, or installing the 1336T-GT1-SP51A. One should use a logic grounded wrist strap when touching any parts in the drive. You should consider reading up on static control procedures first before doing anything with the drive.

When installing the 1336T-GT1-SP51A, a digital multimeter capable of reading 1000 Volts DC/750 Volts AC with a minimum input resistance of one megohm is required. Make sure to have the user manual for both the drive and the PLC communications adapter. That way you’ll know how to install the replacement part the right way. The analog outputs from a PLC Communication Board can be utilized to connect the Velocity Feedback and the Torque Reference. Once the outputs are linked, a chart recorder can be linked to the other Analog Output channels. That would allow the operator to record the responses of the drives to any given change in the reference. Both parameters should remain stable in an optimal system.