DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1336T-GTB-SP2C. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1336T-GTB-SP2C |
Product Line | 1336 FORCE |
Description | Control Board |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336T-GTB-SP2C has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336T-GTB-SP2C units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1336T-GTB-SP2C |
Product Line | 1336 FORCE |
Description | Control Board |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336T-GTB-SP2C has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336T-GTB-SP2C units instead of migration.
sThe 1336T-GTB-SP2C 1336T Force Drive Control Board is a control board by Allen-Bradley for the Allen-Bradley 1336T Force Drive Series C and upward, on which the control interface board and the remote I/O board are connected, and it is a major component of the circuit board platform. The 1336T-GTB-SP2C 1336T controls all the functions of the drive, and it has various points of connection. It is installed on a mounting plate (the main control board mounting plate), and it is held tightly to the mounting plate with a screw.
When installing the 1336T-GTB-SP2C force drive control board, the terminals V+ and V- on the Terminal block (TB11) need to be checked first for residual control voltage, and the J1, J2, J6, and the J8 connectors must be attached to the board. The 1336T-GTB-SP2C board can then be connected to the mounting plate, and fastened in place with 5 fastening screws, and both the mounting plate and the fastened board are inserted in the drive via the slide mount stand-off. The optional 8-pin connector from the HIM mounting plate is also connected, and the +DC/–DC Brake Terminals, and the terminals R-L1, S-L2, and T-L3 on the TB1 are also connected. The 1336T-GTB-SP2C force drive control board provides connection to the adapter board, the control interface board, and the L-option board, and it has an LED indicator which indicates the control board’s operation status. For protection, the 1336T-GTB-SP2C control board can fit into an IP00 or an IP20 enclosure. It can be controlled through its serial communication ports or with a remote control panel.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Please refer to the manual for more information about the 1336T-GTB-SP2C such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336T-GTB-SP2C Ser A
|
1336T-GTB-SP2C/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1336T-GTB-SP2C |
Product Line | 1336 FORCE |
Description | Control Board |
Product Lifecycle Status* | Discontinued/Obsolete |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1336T-GTB-SP2C |
Product Line | 1336 FORCE |
Description | Control Board |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336T-GTB-SP2C has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336T-GTB-SP2C units instead of migration.
The 1336T-GTB-SP2C 1336T Force Drive Control Board is a control board by Allen-Bradley for the Allen-Bradley 1336T Force Drive Series C and upward, on which the control interface board and the remote I/O board are connected, and it is a major component of the circuit board platform. The 1336T-GTB-SP2C 1336T controls all the functions of the drive, and it has various points of connection. It is installed on a mounting plate (the main control board mounting plate), and it is held tightly to the mounting plate with a screw.
When installing the 1336T-GTB-SP2C force drive control board, the terminals V+ and V- on the Terminal block (TB11) need to be checked first for residual control voltage, and the J1, J2, J6, and the J8 connectors must be attached to the board. The 1336T-GTB-SP2C board can then be connected to the mounting plate, and fastened in place with 5 fastening screws, and both the mounting plate and the fastened board are inserted in the drive via the slide mount stand-off. The optional 8-pin connector from the HIM mounting plate is also connected, and the +DC/–DC Brake Terminals, and the terminals R-L1, S-L2, and T-L3 on the TB1 are also connected. The 1336T-GTB-SP2C force drive control board provides connection to the adapter board, the control interface board, and the L-option board, and it has an LED indicator which indicates the control board’s operation status. For protection, the 1336T-GTB-SP2C control board can fit into an IP00 or an IP20 enclosure. It can be controlled through its serial communication ports or with a remote control panel.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Please refer to the manual for more information about the 1336T-GTB-SP2C such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336T-GTB-SP2C Ser A
|
1336T-GTB-SP2C/A, Series A, Rev A | Request Quote |