The Allen-Bradley 1336VT-B005-EAN-FA2-L3-S1 Adjustable Frequency AC Drive is a microprocessor-based variable speed drive with a control panel, 115V AC Logic interface control, and a serial port connector option, used for control of 3-phase induction motors. The drive’s control, operation, and setup are digitally closed for precision and accuracy and the drive provides variable motor speed by utilizing PWM signal technology. The 1336VT-B005-EAN-FA2-L3-S1’s operating voltage range is 380 to 460V AC (3-phase) at 48 to 62Hz operational frequency, with ±10% voltage tolerance, and it has an operating current of 8A. The drive has a power output of 4.9KVA, 5.4KVA, 6.0KVA at 380V AC, 415V AC, and 460V AC, and its displacement power factor is 0.95 A. The drive offers AC under and over-voltage trips of 570V AC and 275V AC, and it comes with a Transient Line Protection of up to 5000V by using Metal Oxide Varistors. The 1336VT-B005-EAN-FA2-L3-S1 has a Logic Ride Thru Time of 2s or longer, depending on the reliability of user-supplied external circuits, and it has motor control from its programmable Volt per Hertz control. The drive employs Sine Coded Pulse Width that is modulated with a 2 to 10 KHz carrier frequency for speed control, and it has a selectable output frequency range between 0 and 250Hz, which is proportional to the output voltage range between 0 and the applied input voltage (380V AC, 415V AC, and 460V AC).

The 1336VT-B005-EAN-FA2-L3-S1 has digitally controlled motor speed for precision and repeatable results, and it has 11 selectable output voltage values from 0 to 480V AC. It also has 2 independent and programmable acceleration and deceleration times, and its overload capability ranges from 50% to 115% of the rated drive current. The drive has a Logic Interface control option (L3) used for control inputs, and it also has a basic control panel for accessing 71 drive programming parameters, out of the total of 90 drive’s parameters. The 1336VT-B005-EAN-FA2-L3-S1 has a Serial Port which allows for complete access to the drive’s 90 programming parameters, and it is encased in an IP20 (NEMA Type1) rated enclosure. It has a functioning temperature range between 0 and 40°C, at 5 to 95% relative humidity, and it is stored at a temperature range of –40 to 85°C. It can take an operating shock of 15G for 11ms, with an operation vibration of 1G, and it can retain optimal function at a height of 1000m. The 1336VT-B005-EAN-FA2-L3-S1 weighs approximately 16.5Kg, and it has a total shipping volume of 283mm x 477mm x 223mm.