The 1336VT-B010-EON-FA2-L1 is an Allen-Bradley 1336VT Drive that supports 14 Amps and it has the L1 Logic Interface and POINT I/O Communication. The drive is self-powered.  Being part of the 1336VT series of adjustable frequency AC Drives, it is engineered for maximum precision and it offers control for the induction motors. The 1336VT series offers several output power ratings that range from 5 to 300 Amps. To ensure the drive has maximum protection in industrial environments; the drive has two enclosure modules. This includes the IP00 and also the IP20. It can be programmed and controlled through the use of the Serial Communication ports, use of the Local Control Panel and also allows the Remote Control Panels. Just like each of the drives classified under 1336 VT drive series, the 1336VT-B010-EON-FA2-L1 has been manufactured to withstand industrial environments. Therefore, the 1336VT-B010-EON-FA2-L1 offers the capabilities that are necessary for running on any factory floor.

The 1336VT-B010-EON-FA2-L1 uses a set of 90 user parameters that enable the selecting and control of drive operations. There are over 70 accessible parameters through the programming and the display panels. The 90 serial ports are also accessible through the serial ports. The initial values for all the ports on the 1336VT-B010-EON-FA2-L1 are initially set to 0 and indicated through the various displays. Before operating the 1336VT-B010-EON-FA2-L1, it is important that users go through the provided manual carefully and inspect the drive for any possible shipping damage before installing it. The storage temperature range for the 1336VT-B010-EON-FA2-L1 is -40 to 85 degrees Celsius. It should be stored in a non-corrosive environment and it should not be subjected to conditions other than what is indicated by the manufacturer.