The 1336VT-B015-EAN-FA2-L1 is an adjustable frequency AC drive that is part of Allen-Bradley’s 1336VT series. It is a solid-state control equipment that uses a self-powered source and is housed in a NEMA Type 1 (IP20) enclosure and functions using 21 Amperes. The start and stop input for this drive comes from the optional FA2 control panel pushbutton. Additionally, this drive comes with a POINT I/O communication option and L1 Logic Interface board.

The Allen-Bradley 1336VT drives (including the 1336VT-B015-EAN-FA2-L1) are built for maximum control of induction motors. They are high-performance adjustable frequency drives that yield a three-phase, PWM output to provide a variable motor speed. They are also microprocessor controlled and digitally programmable. Each of the drives that belong to this group is specifically created to resist industrial environment conditions. They can be controlled and programmed using Serial Communication Ports, Remote Control Panels, or Local Control. The 1336VT-B015-EAN-FA2-L1 is a three-phase drive that is suitable to run using 380 Volts, 415 Volts, or 460 Volts of AC voltage inputs at 50 to 60 Hertz. The output current rating for the drive is 13.8 kVA for 380 Volts AC, 15.1 kVA for 415 Volts AC, or 16.7 kVA for 460 Volts AC. It is well-engineered to meet the demands of various sections in an integrated system. Proper installation and maintenance are required for the drive to avoid a reduction in product life or equipment damage. If not installed immediately, the 1336VT-B015-EAN-FA2-L1 drive must be stored in a dry, clean, corrosive-free area with an ambient temperature ranging from 0 to 65 degrees Celsius.