The 1336VT-B025-EOP-FA2-L1 is an Allen-Bradley high-performance, microprocessor-controlled adjustable frequency drive that is engineered to control induction motors with three-phase power when on industrial applications that are critical. It has 34 Amps and an L1 Logic interface. Besides this, it also features a POINT I/O communication. This drive gives out a three-phase PWM frequency output power that is adjustable to supply a motor speed that is adjustable. This drive’s output voltage is given as a result of the function of the output frequency which is also adjustable to match the motor parameters. This aids this device in obtaining a motor performance that is optimum.

The 1336VT-B025-EOP-FA2-L1 is digitally programmed to aid it in achieving an accurate and repeatedly precise control, operation, and set up. Operators of this drive are able to program it through the serial communication port when using optional devices or to program it from a local or remote control panel. The programming display panel reports the fault conditions or the various statuses depending on the operator’s configuration. Fault diagnostic starts, self-check diagnostics, and the load on this device will always start each time the operators power this drive. As it is in motion, the 1336VT-B025-EOP-FA2-L1 continues to monitor potential conditions that may be faulty.

If the operator intends to enable real-time preventive maintenance, parameters such as control conditions and drive output currents should be monitored even when the drive is performing an operation. The 1336VT-B025-EOP-FA2-L1 also has diagnostic codes that isolate problems in case a fault occurs. The codes also identify the condition and enable quick corrective measures to restore the process control to its normal state. If this device it fails to install, the operators should store it in a clean and dry area that has an ambient temperature of up to -40°C.