1336F-B020-AA-EN-HCS1

The 1336F-B020-AA-EN-HCS1 adjustable frequency drive is an AC-powered motor control drive. It is designed and manufactured by Allen-Bradley as part of the 1336 PLUS II series. Only technicians who are familiar with this type of drive and its associated equipment should perform the installation and maintenance of the drive and its system. Failure to comply with this recommendation can lead to equipment damage or serious user injury. All personnel who are performing maintenance work on the 1336F-B020-AA-EN-HCS1 drive must make sure that the drive is powered off and that the DC bus capacitors are completely discharged before beginning work. Two test points on the TB1 terminal block of the drive are provided specifically for measuring the DC bus voltage, and this voltage rating should be 0.0 Volts DC. The frame size of the 1336F-B020-AA-EN-HCS1 adjustable frequency drive is Size B.

The maximum rated output power of the Allen-Bradley 1336F-B020-AA-EN-HCS1 1336 PLUS II series adjustable frequency drive is 20 Horsepower when the drive is connected to a 3-phase AC voltage source that can provide it with an input voltage range from 380 to 480 Volts AC, when the PWM carrier frequency rating is 4 kilohertz, and when the ambient conditions are in accordance with the manufacturer’s recommendations. Any deviation from these conditions leads to variation in the drive’s output power rating. An HMI module is installed on the 1336F-B020-AA-EN-HCS1 drive, and this HMI is a programmer/controller HMI with an analog potentiometer. The enclosure of the 1336F-B020-AA-EN-HCS1 drive is a NEMA Type 1 enclosure with an IP 20 protection rating. The drive is protected against small amounts of dust but not against liquids. The approximate weight of the drive is 50 pounds.