1336F-B020-AN-EN-GM2-LA2-LA3-L6

The Allen-Bradley/Rockwell Automation 1336F-B020-AN-EN-GM2-LA2-LA3-L6 adjustable frequency drive is a 3-phase 1336 PLUS II series motor controller that has been designed as a control solution for applications with advanced motor speed control requirements. The drive can be programmed so that it can adjust its frequency in order to modify the speed and torque rating of the connected motor. These speed and torque changes are programmed in advance and they are performed smoothly so that the motor does not suffer from wear and damage. The 1336F-B020-AN-EN-GM2-LA2-LA3-L6 drive operates with an input voltage range of 380 to 480 Volts AC and with a Horsepower output rating of 20 Horsepower. It also comes with a control logic noise immunity rating of 1500 Volts peak. At the same time, the 1336F-B020-AN-EN-GM2-LA2-LA3-L6 adjustable frequency drive has a logic control ride-thru time of 0.5 seconds minimum and 2 seconds typical.

The Allen-Bradley/Rockwell Automation 1336F-B020-AN-EN-GM2-LA2-LA3-L6 1336 PLUS II series  adjustable frequency drive comes with protection features that detect different fault conditions and trip the drive to protect it from these fault conditions. If these fault conditions are not addressed immediately, they can put the drive, the users, and the whole system at risk. These protection features are under and over-voltage, over-temperature, external signal, ground fault, and load loss protection. The 1336F-B020-AN-EN-GM2-LA2-LA3-L6 drive comes with 6 alarms that indicate when a fault is about to occur so that the supervisors can take preventive action before the fault happens. This drive includes a process PI controller and speed-sensitive electronic overload protection. The 1336F-B020-AN-EN-GM2-LA2-LA3-L6 drive also comes with step logic and transverse functions. This drive comes with several optional interfaces. These interfaces include a control interface that operates at 115 Volts AC and 2 analog interfaces that connect to Slot A and Slot B on the drive. There is an analog interface with 2 isolated configurable inputs for Slot A and an analog interface with 2 isolated configurable outputs for Slot B.