1336F-B030-AE-EN-HCS2-L5

The Allen-Bradley 1336F-B030-AE-EN-HCS2-L5 motor control drive is an AC-powered 1336 PLUS II series drive with a nominal output power rating of 30 Horsepower. The drive’s performance data that is listed in the manual is valid at 4 kilohertz of PWM frequency, 380 to 480 Volts AC 3-phase input voltage, an ambient temperature of 0 to 40 degrees Celsius, an elevation of 0 to 1000 meters, and 5 to 95% relative operating humidity without condensation. Variations in these operating conditions will often lead to some deviation from the rated drive parameters, and may cause damage in extreme cases. For example, using single-phase AC input voltage in the 1336F-B030-AE-EN-HCS2-L5 drive will lead to 50% output derating. Similarly, any variation in the temperature, elevation, or humidity of the drive will lead to some deviation from the rated drive parameters. The 1336F-B030-AE-EN-HCS2-L5 drive is a modular drive with a slot-based architecture.

The module installed in the slot for HMI modules on the Allen-Bradley 1336F-B030-AE-EN-HCS2-L5 1336 PLUS II series motor control drive is a programmer HMI module with a digital potentiometer and it supports a feature for uploading and downloading data. The display panel on the HMI enables easy programming and allows the operators to monitor the 1336F-B030-AE-EN-HCS2-L5 drive’s parameters. The control panel on the HMI enables the easy control of the drive’s functions. The module installed in the slot for control interfaces is rated at 24 Volts AC/DC. The enclosure of the 1336F-B030-AE-EN-HCS2-L5 drive is IP 20-rated and EMC-compatible. The drive weighs approximately 50 pounds. It has holes on the enclosure that make it easy to mount. Each of these holes has a 19-millimeter diameter. The different power and communication cables are installed through cable entry holes on the bottom of the drive enclosure.