Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-CWF150-AN-EN-HASP-L4

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-CWF150-AN-EN-HASP-L4

|
Need a Specific Revision?

The AC drive with the product code 1336F-CWF150-AN-EN-HASP-L4 is designed and manufactured by Allen-Bradley/Rockwell Automation and it includes a programmer-only HMI and a control interface with a TTL contact. The drive is part of the 1336 PLUS II series (Bulletin 1336F) and it has a power rating of 11 kilowatts or 15 Horsepower.

Out of stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-CWF150-AN-EN-HASP-L4

ManufacturerAllen Bradley
CategoryDrives
Product Line1336 PLUS II Drives
Part Number1336F-CWF150-AN-EN-HASP-L4
Weight45.00 lbs (20.41 kg)
Input voltage500 to 600 Volts AC or 775 Volts DC
Input frequency47 to 63 Hertz
Phases3
Nominal power rating11 kilo Watts (15 Horsepower)
Enclosure typeIP 00 (Open)
FrameA4
LanguageEnglish
Human-Machine InterfaceProgrammer only, snap-in, IP 20 (NEMA Type 1)
Control interface optionTTL contact
Operating temperature0 to 50 degrees Celsius (32 to 122 degrees Fahrenheit)
Storage temperature-40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit)
Relative humidity5 to 95% (non-condensing)
CertificationsUL, CSA, CE
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1336F-CWF150-AN-EN-HASP-L4 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336F-CWF150-AN-EN-HASP-L4 units instead of migration.

Request a Repair

The Allen-Bradley/Rockwell Automation 1336F-CWF150-AN-EN-HASP-L4 AC drive is intended for AC power supply systems with 3 operating phases. The unit includes sensorless vector control technology and it is part of the 1336 PLUS II product series. This drive is built according to all the applicable CE directives for emissions, immunity, and low voltage. Also, the drive is UL listed and CSA certified. The 1336 PLUS II product series offers a variety of models that are made for applications with different levels of difficulty. These drives have control features like independent modes for the acceleration and deceleration times, a programmable current limit, and a control method with programmable carrier frequency. Also, the 1336F-CWF150-AN-EN-HASP-L4 drive has an efficiency rating of 97.5% at the rated current and nominal line voltage along with a 0.95 displacement power factor.

The 1336F-CWF150-AN-EN-HASP-L4 drive comes with a programmer-only HMI and a control interface with a TTL contact. The 1336F-CWF150-AN-EN-HASP-L4 drive has a voltage rating of 500 to 600 Volts AC or 775 Volts DC along with a power rating of 11 kilowatts or 15 Horsepower. The enclosure of the drive has an IP 00 marking (open) and its frame is labelled with the size A4 designation. The drive is intended for use in facilities where there are no corrosive factors like gas, vapors, or dust. The specified relative humidity range of the operating environment should be from 5 to 95% (non-condensing) and the maximum operating altitude is 1000 meters (3300 feet) without derating. The 1336F-CWF150-AN-EN-HASP-L4 drive has a 15 G shock tolerance for the duration of 11 milliseconds and a maximum vibration of 0.152 millimeters (0.006 inches) of displacement at 1 G peak.