1336-L-SP13A | Allen Bradley Drives 1336 Transistor Assembly

1336-L-SP13A

Rated 4.8 with 12 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1336-L-SP13A

Description: The Allen-Bradley 1336-L-SP13A inductor belongs to the 1336 series of renewal parts. It comes with a D size frame. It has 230 Volts of voltage rating and 60 Horsepower of output power. This Inductor is compatible with the 1336 PLUS, FORCE, and IMPACT drives.
Available Now
Request a quote for 1336-L-SP13A

Description:

The Allen-Bradley 1336-L-SP13A inductor belongs to the 1336 series of renewal parts. It comes with a D size frame. It has 230 Volts of voltage rating and 60 Horsepower of output power. This Inductor is compatible with the 1336 PLUS, FORCE, and IMPACT drives.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1336-L-SP13A.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 12 reviews

    Technical Specifications for 1336-L-SP13A

BrandAllen-Bradley / Rockwell Automation
Series1336 Transistor Assembly
Part Number1336-L-SP13A
ManufacturerRockwell Automation
BrandAllen-Bradley
Series1336
Part Number 1336-L-SP13A
Product Type Inductor
Frame Designation D
Voltage Rating 230 Volts
Horsepower Rating 60 HP
Drive Compatibility 1336 PLUS / FORCE / IMPACT
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-L-SP13A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-L-SP13A units instead of migration.

BrandAllen-Bradley / Rockwell Automation
Series1336 Transistor Assembly
Part Number1336-L-SP13A
ManufacturerRockwell Automation
BrandAllen-Bradley
Series1336
Part Number 1336-L-SP13A
Product Type Inductor
Frame Designation D
Voltage Rating 230 Volts
Horsepower Rating 60 HP
Drive Compatibility 1336 PLUS / FORCE / IMPACT
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-L-SP13A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-L-SP13A units instead of migration.

s

About 1336-L-SP13A

The Allen-Bradley 1336-L-SP13A inductor belongs to the 1336 series of renewal parts. It comes with a D size frame. It has a 230 Volts voltage rating and a 60 Horsepower of output power. This Inductor is compatible with the Allen-Bradley 1336 PLUS, FORCE, and IMPACT drives. The 1336-L-SP13A inductor is designed to block high-frequency pulses while allowing lower frequency pulses. It helps to resist high inrush current to protect the DC bus capacitor and rectifier. The 1336-L-SP13A inductor maximizes the circuit inductance while improving the power quality without dropping the AC input line voltage.



 



The 1336-L-SP13A Inductor can be used to reduce AC input line harmonics. It is situated at the bottom of the host drive. Before the replacement procedure, check the break terminals for the absence of control voltage after removing the power from the drive. Disconnect the AC input and motor output wiring from TB1 to access the inductor easily. The inductor can be taken out from the drive after removing the bolts fastening it. These inductors can attenuate harmonics better than AC line reactors. Placing the inductor at the output side of long lead motor applications will reduce reflections waves to the motor. It helps to absorb voltage and current spikes and it reduces AC ripples on the DC bus. This inductor can quickly troubleshoot and easily be replaced to reduce production downtime. It is recommended to mount the inductor as close to the bottom of the drive as possible. Make sure to leave sufficient distance between the inductor assembly and the drive to provide clearance for wirings.



Repair Services for 1336-L-SP13A

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-L-SP13A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 1336-L-SP13A

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1336-L-SP13A

Resolutions For 1336-L-SP13A

About

Technical Specifications for 1336-L-SP13A

BrandAllen-Bradley / Rockwell Automation
Series1336 Transistor Assembly
Part Number1336-L-SP13A
ManufacturerRockwell Automation
BrandAllen-Bradley
Series1336
Part Number 1336-L-SP13A
Product Type Inductor
Frame Designation D
Voltage Rating 230 Volts
Horsepower Rating 60 HP
Drive Compatibility 1336 PLUS / FORCE / IMPACT
Product Lifecycle Status*Discontinued/Obsolete
BrandAllen-Bradley / Rockwell Automation
Series1336 Transistor Assembly
Part Number1336-L-SP13A
ManufacturerRockwell Automation
BrandAllen-Bradley
Series1336
Part Number 1336-L-SP13A
Product Type Inductor
Frame Designation D
Voltage Rating 230 Volts
Horsepower Rating 60 HP
Drive Compatibility 1336 PLUS / FORCE / IMPACT
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1336-L-SP13A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-L-SP13A units instead of migration.

About 1336-L-SP13A

The Allen-Bradley 1336-L-SP13A inductor belongs to the 1336 series of renewal parts. It comes with a D size frame. It has a 230 Volts voltage rating and a 60 Horsepower of output power. This Inductor is compatible with the Allen-Bradley 1336 PLUS, FORCE, and IMPACT drives. The 1336-L-SP13A inductor is designed to block high-frequency pulses while allowing lower frequency pulses. It helps to resist high inrush current to protect the DC bus capacitor and rectifier. The 1336-L-SP13A inductor maximizes the circuit inductance while improving the power quality without dropping the AC input line voltage.



 



The 1336-L-SP13A Inductor can be used to reduce AC input line harmonics. It is situated at the bottom of the host drive. Before the replacement procedure, check the break terminals for the absence of control voltage after removing the power from the drive. Disconnect the AC input and motor output wiring from TB1 to access the inductor easily. The inductor can be taken out from the drive after removing the bolts fastening it. These inductors can attenuate harmonics better than AC line reactors. Placing the inductor at the output side of long lead motor applications will reduce reflections waves to the motor. It helps to absorb voltage and current spikes and it reduces AC ripples on the DC bus. This inductor can quickly troubleshoot and easily be replaced to reduce production downtime. It is recommended to mount the inductor as close to the bottom of the drive as possible. Make sure to leave sufficient distance between the inductor assembly and the drive to provide clearance for wirings.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-L-SP13A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1336-L-SP13A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF