The 1336-QOUT-SP10A transistor is a spare part kit that contains one transistor output assembly for Allen-Bradley variable frequency AC drives. Specifically, the 1336-QOUT-SP10A transistor can be used for 1336 series drives from the Plus, Impact, Plus II, and Force product lines. Three transistor output assemblies are required per drive. The 1336-QOUT-SP10A transistor works with Frame C drives rated for 30 Horsepower and 40 Horsepower output and which have an input voltage rating of 575 Volts AC. Allen-Bradley 1336 drives incorporate solid-state electronics that are susceptible to electrostatic discharge. Precautions that protect drive parts from electrostatic discharge should be implemented during drive repair. The most important of these precautions is the use of a grounded wrist strap. The wrist strap prevents charge build-up on the technicians.

Additionally, drive components such as the 1336-QOUT-SP10A transistor should only be held on the edges so that the circuit paths and components are not touched. Drive modules should be stored in conductive packaging during shipping. Modules being returned for repair should also be stored in conductive packaging. The 1336 series drives come in multiple enclosures, each with its own recommended operating temperature range. Operating the drive outside the recommended temperature range can affect performance and reduce drive reliability. The working temperature range for open (IP 00) drives is from 0 to 50 degrees Celsius. The working temperature range for IP 20 rated drives is 0 to 40 degrees Celsius. The working temperature range for IP 65 rated drives is 0 to 40 degrees Celsius. The working temperature range for IP 54 rated drives is 0 to 40 degrees Celsius.