160-AA02NSF1P1

The Allen-Bradley 160-AA02NSF1P1 is a Variable Speed Drive from 160 series (SSC). This drive is connected to 200 to 240 Volt AC three-phase voltage and 2.8A current on its input side. It is a small-sized 0.37kW (0.5HP) rated variable speed drive with a 2.3 A output current rating. The 160-AA02NSF1P1 is protected in an IP20 (open) enclosure. This drive is an analog signal follower type, meaning that it gets an analog signal (±10V, or potentiometer, or 4-20mA) as a frequency reference. The 160-AA02NSF1P1 drive has digital inputs for start and reversing functions, as well as a single programmable input. There are connecting pins for a brake resistor and for a capacitor module; it has also one relay circuitry for one user programmable output. The device is convection cooled. The program keypad module is an advanced feature that is installed on this device. The program keypad module is positioned on the drive’s front panel. It’s only operational when it is installed directly on the drive. This module runs in programming (program group parameters editing) and display (parameter viewing) mode. The 160-AA02NSF1P1 control methods are PWM algorithm, V/Hz, DC boost, and current limiting. The auto-boost (IR Compensation) feature performs adjustments of the output voltage in order to improve torque performance at low speeds. The slip compensation is responsible for the overall improvement of speed regulation. This variable speed drive maintains the desired output frequency, even while load increases. The 160-AA02NSF1P1 box-shaped drive dimensions are 165 x 152 x millimeters (6.51 x 6.00 x 3.15 inches). The product’s weight is approximately 2.07 pounds (0.94 kilograms), and its operating temperature range is from 0 to 50 degrees Celsius.