160-AA04NPS1P1

The Allen-Bradley 160-AA04NPS1P1, equipped with a program keypad module, is an AC-powered Smart Speed Controller, or SSC, which is cooled via a fan and has a three-phase input. At maximum, it has an output current of 4.5 A and its input kVA is 2.2. This controller should only be used in a location that has no corrosive particles in its atmosphere for safety purposes. It should also be operated in temperatures ranging from 32 to 122 degrees Fahrenheit, at a maximum altitude of 3300 feet, and it should be stored in temperatures ranging from -40 to 185 degrees Fahrenheit. The 160-AA04NPS1P1 controller, which has an enclosure rating of IP20, should be mounted vertically on a plane that is flat and level using a 35 millimeter DIN rail or with 4.5-millimeter maximum diameter mounting screws. Its input voltage at a 50 to 60 Hertz line frequency is 200 to 240 Volts AC, and it also has a 180 to 265 Volt AC operational input range. The 3-phase motor output rating for this 160-AA04NPS1P1 controller is comprised of 1 HP and 0.75 kW and it has a power dissipation of 40 Watts. The user can also program the outputs, namely the frequency and voltage, of this controller.

The keypad module that is installed on the 160-AA04NPS1P1 controller comes with 8 keys made up of 3 control keys (enter, up, and down), 5 program keys to set the parameters of the SSC, LED indicators (with 2 for the motor rotation direction and 1 for the program mode) and a 6-digit LED display that has 7 segments. This controller also has 3 terminal blocks that are for specific wirings of the 160-AA04NPS1P1 controller, namely the dynamic braking and the line power (TB1), the capacitor module and the motor (TB2), and the control (TB3). At the front of the 160-AA04NPS1P1 controller is an indicator panel that shows operating or fault conditions via the red and green LED indicators.