160-AA04NSF1P1

The 160-AA04NSF1P1 is an analog signal follower model from the 160 series of the smart motor controllers by Allen Bradley. This 160-AA04NSF1P1 module has a built-in programmer and is a 1HP motor controller. The 160-AA04NSF1P1 has a drive rating of 0.75 kW for its output; its the output current rating is 4.5 Amperes. The operating input voltage for the 160-AA04NSF1P1 is 180 Volts to 356 Volts and the input power requirement is 2.7 kVA.  The 160-AA04NSF1P1 has a dynamic braking torque of 100% without an external resistor, while the addition of an external braking resistor will increase the braking torque to 200%.

The power dissipation for the 160-AA04NSF1P1 with an open style enclosure is 35 Watts, and 10 Watts with the chassis mount enclosure. Both the open style and chassis mount enclosure have an enclosure rating of IP20. With the IP20 rating, it is recommended that the 160-AA04NSF1P1 be operated in an environmental temperature range of 0 to 50 degrees Celsius; the humidity level should be kept between 0 and 95% to avoid condensation on the module. In addition, the 160-AA04NSF1P1 must be stored at in temperature range of -40 to 85 degrees Celsius. The 160-AA04NSF1P1 has a built-in overvoltage protection, which trips at 400 Volts DC, which is equivalent to 290 Volts AC of the incoming line voltage. It also has under voltage protection, which occurs at a voltage of 210 Volts DC (which is equivalent to 150 Volts AC of the incoming line voltage). Apart from overvoltage and undervoltage protection, this module also provides an over-temperature protection. The 160-AA04NSF1P1 measures 152 millimeters in height, 80 millimeters in length, and 165.4 millimeters in depth.