160-AA08PSF1P1

The 160-AA08PSF1P1 three-phase variable speed controller that is made to provide a reliable means to control the speed, acceleration, deceleration, starting, and stopping of an industrial variable speed motor. This variable speed controller has been manufactured by Allen-Bradley and it is included in the 160 controller series. This controller can operate both in single-phase and three-phase systems employing a voltage range of 200 to 240 Volts. This voltage is combined with an output current rating of 8.0 or 6.5 Amps at specific voltages of 180 and 240 Volts. These current ratings will vary according to the voltage level that is applied. The Allen-Bradley 160-AA08PSF1P1 three-phase variable speed controller comes with an enclosure that includes a ventilation fan, which is one of the main advantages of the controller since it will help to diminish the possibility of overheating. The maximum operating temperature cannot exceed 50 degrees Celsius. This enclosure is IP 20 rated and it comes with a chassis mounting mechanism.

The Allen-Bradley 160-AA08PSF1P1 three-phase variable speed controller comes with an analog signal control model and it includes one RS-232 communication port by default. Another important feature that is included with this controller model is a programmable keypad module that is installed in the controller and that enables the controller to provide a keyboard to the users with function keys and reset buttons for easy machine control. The Allen-Bradley 160-AA08PSF1P1 three-phase variable speed controller has a dynamic brake torque rating of 50 percent, and without an external resistor, and the torque rating can reach up to 150 percent with the use of an external resistor. It also has a power dissipation rating of 74 Watts if it is used in an open mounting setup and the rating is 15 Watts when it is mounted in a chassis.