160-AA12PSF1

The 160-AA12PSF1 variable speed controller has been designed and manufactured by Allen-Bradley and introduced to the industrial market in the Allen-Bradley 160 SSC controller series. This controller comes with an IP 20 rated enclosure that includes a heatsink which contributes greatly to efficient operation since it will help the controller to remain cooled down and it will help to prevent overheating. Overheating can cause serious damages to the controller, adjacent equipment, and the overall application process since it can stop operations suddenly and cause loss of data. The Allen-Bradley 160-AA12PSF1 variable speed controller operates with a single-phase and three-phase voltage of 200 to 240 Volts and it has a Horsepower rating of 3 Horsepower (2.20 kilowatts).

The output current of the Allen-Bradley 160-AA12PSF1 controller is 12 Amps while operating at a minimum voltage of 180 Volts and it is 9.2 Amps at the maximum voltage of 240 Volts. It is important to note that the current and voltage should be kept within the recommended ranges to ensure safe operations and prolong the life of the controller and all its components. The installation of the Allen-Bradley 160-AA12PSF1 variable speed controller can be done by leaving the controller open or by mounting it in a chassis. Each of these mounting options causes the controller to have different heat dissipation ratings. When the controller is mounted openly, the heat dissipation is 107 Watts maximum and when the controller is chassis-mounted, the dissipation is 20 Watts maximum. The Allen-Bradley 160-AA12PSF1 variable speed controller has a dynamic torque rating of 50 to 115 percent. The maximum operating temperature allowed is 50 degrees Celsius and there must not be any kind of condensation in the operating environment.