Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 160 SSC Variable Speed Drives 160-BA01NPS1P1

Product image is representative; revision or series may vary. Contact us to request a specific version.

160-BA01NPS1P1

|
Need a Specific Revision?

Allen-Bradley 160-BA01NPS1P1 Variable Speed Drive with a 3 Phase Input and a 380-460V Voltage Rating. It also has a Open(IP20) Enclosure Type and a Preset Speed Model Type.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 160-BA01NPS1P1

ManufacturerAllen Bradley
Product TypeVariable Speed Drive
Product Line160 SSC Variable Speed Drives
Part Number160-BA01NPS1P1
Weight1.94 lbs (0.88 kg)
Voltage Rating380-460V
Phase Input3
Current RatingA01
Enclosure TypeOpen(IP20)
Model TypePreset Speed
SeriesC
Max. Output Amps1.2
Operational Input Voltage Range340-506V AC
Input Current1.4
Cooling MethodConvection
ProgrammerProgram Keypad Module
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 160-BA01NPS1P1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 160-BA01NPS1P1 units instead of migration.

View as PDF
Request a Repair

The 3-phase Allen-Bradley 160-BA01NPS1P1 module is an AC-powered Smart Speed Controller (SSC) which is part of the 160 series of controllers that comes with a programming keypad that has 8 keys, and a preset speed control. This preset speed control featured on the controller has 8 preset frequencies available by default, while the program keypad module specifically has 3 keys for the up, down, and enter functions, 5 programming keys for setting the parameters or mode of the controller, 2 LED indicators that show the current direction of rotation of its motor, 1 LED indicator showing the current program mode, and a 7-segments LED display which can show 6 digits. The 3-phase motor rating of the 160-BA01NPS1P1 controller’s motor output is ½ HP and 0.37 kW and it has a 1.2 A output current. At a line frequency of 50 to 60 Hertz, its input voltage is 380 to 460 Volts AC, and it has a 340 to 506 Volt AC operating input range and it has an input kVA of 1.1. This controller also has modifiable outputs, specifically for its voltage and frequency.

Users can also find an indicating panel at the front of the 160-BA01NPS1P1 controller and it has LED red/green status indicators installed for identifying the operating or fault conditions of the controller. It also has terminal blocks, 3 in particular, dedicated to various wirings of the controller, particularly for the motor and capacitor module wiring (TB2), the dynamic braking and line power (TB1), and the control wiring (TB3). The operation of the 160-BA01NPS1P1 controller will remain optimal at an altitude of up to 3300 feet or 1000 meters, and at a temperature that ranges from 32 to 122 degrees Fahrenheit. Users can store it at a temperature within a -40 to 185 degrees Fahrenheit range. Remember to install this controller, with an open-type, IP20 enclosure, on a surface that is level by using mounting screws that have 4.5 millimeters or smaller diameter or by using a DIN rail mount that is 35 millimeters in an environment without corrosive vapors or particles in its atmosphere.

Revision Part #Also known as
160-BA01NPS1P1 Ser A160-BA01NPS1P1/A, Series A, Rev A
160-BA01NPS1P1 Ser B160-BA01NPS1P1/B, Series B, Rev B
160-BA01NPS1P1 Ser C160-BA01NPS1P1/C, Series C, Rev C
Don't see your particular revision? Contact us now.