160-BA01NSF1P1

The Allen-Bradley 160-BA01NSF1P1 is a Variable Speed Drive from the 160 series (SSC). This drive is supplied with 380 to 460 Volts of 3-phase AC voltage. It is the smallest drive in the Bulletin 160 series with a 1.2A current rating and a 0.37kW (0.5HP) power rating. The 160-BA01NSF1P1 is protected in an IP20 (open) enclosure. Its hardware is configured to operate as an analog input signal follower. The program keypad module is installed on the device. This module provides the flexibility that is necessary to meet a wide range of applications without being forced to use any of external control logic. This module can run in display and programming mode. The 160-BA01NSF1P1 is an analog signal follower model, which means that the speed can be referenced over a voltage or current analog signal or via a connected potentiometer. For this model, which has the program keypad module, extra control methods can be performed, including preset speed control, PI control, and analog control with one preset speed. Control features are PWM algorithm, the switching device, V/Hz ratio, DC boost, and current limiting. The standard drive features for this module are input and output connectors, hinged finger guards, a program keypad module, DC bus test points, a cooling fan, and a DIN latch. This Bulletin 160 SSC is used in refrigeration, HVAC, exhaust, metering, and similar applications. The 160-BA01NSF1P1 has compact drive dimensions of 165 x 152 x 80 millimeters (6.51 x 6.00 x 3.15 inches). The shipping weight is approximately 0.94 kilograms (2.07 pounds) and the device is intended to work in a 0 to 50 degree Celsius operating range. Use 75Ö¯C wire 0.75-4mm2 (12 – 18 AWG) for wiring purpose.