160-BA01PPS1P1

The 160-BA01PPS1P1 Type B variable speed controller has been manufactured as part of the 160 SSC controller series by Allen-Bradley/Rockwell Automation. This controller model can only operate within a three-phase voltage system and it comes with a rated voltage of 380 to 460 Volts. Its nominal kilowatt output rating is 0.37 kilowatts and its output current is 1 to 1.2 Amps. The Allen-Bradley 160-BA01PPS1P1 Type B speed controller includes a programming keypad with function keys and reset keys that enable the users to use the controller more effectively. The controller also comes with LED status indicators that indicate whether the controller is ready to use or if it is experiencing a fault. This controller also comes with a terminal block (TB3) that enables programming operations without the programming keypad.

It is recommended to install the Allen-Bradley 160-BA01PPS1P1 Type B speed controller with a specific cable length. When used with excessively large cables, there may be a power loss and using reactors that are sold seperately may be required. Using the shortest recommended cables is therefore more efficient and economical. Depending on the type of motor that is used, different cable lengths are recommended, for example, with the economical, standard, and inverse motors, the ideal cable length is 61 meters. The Allen-Bradley 160-BA01PPS1P1 Type B speed controller has a typical efficiency of 97.5 percent and a transient protection of standard 6 kV. The recommended environmental conditions include vibrations of 1 to 2.5 G, a humidity level of up to 95 percent without condensation, and a maximum ambient temperature of 50 degrees Celsius.