160-BA02PPS1P1

The 160-BA02PPS1P1 is a preset Smart Speed Controller that belongs to Allen Bradley’s Bulletin 160 SSC series. It is a compact variable speed drive with a voltage rating of 380 to 460 Volts at 50 to 60 Hertz and motor rating of 0.55kW, 0.75HP. The enclosure type for this drive is a Chassis Mount (external heatsink) type; it is also built with a Ready/Fault indicating panel. The Fault indicator (red) lights up when a drive fault condition is present in the module, while the Ready indicator (green) flashes when the DC line is charged and the drive is ready to operate. The Bulletin 160 SSC series of drives including the 160-BA02PPS1P1 are tested, approved, and certified by the Underwriters Laboratories (UL). It is an international safety consulting firm and certification company. To maintain proper performance and working conditions, this 160 SSC drive must be stored at an ambient temperature not lower than -40 degrees Celsius, but no greater than 85 degrees Celsius. The drives should be protected from direct sunlight, moisture, and corrosive atmospheres. The 160-BA02PPS1P1 is also a preset speed model, meaning that its output frequency can be controlled via the TB3 (Control Terminal Block). Either a remote potentiometer, a 4 to 20 mA analog input, a P58 (Internal Frequency), or a -10 to 10 Volt DC analog input can be used for this.

At the front panel of the 160-BA02PPS1P1 is a Program Keypad Module that features a 6-digit, 7-segment LED display. It has five keys to programming drive parameters, as well as three keys for input control. The 160-BA02PPS1P1 is also a three-phase input drive that has an output rating of 1.7 Amperes. Additionally, the 160-BA02PPS1P1 controller should be installed on a vertical, flat surface; a 4.5-millimeter mounting screw should be used. The controller can also be mounted on a 35 millimeter DIN rail.