160-BA06LSF1P1

The Allen-Bradley 160-BA06LSF1P1 is a signal follower compatible with the 160 series AC-powered Smart Speed Controller or SSC. This signal follower has a voltage range of 380 to 460 Volts AC and a current of 6 A. The 160 series controllers that users can install the 160-BA06LSF1P1 signal follower to are equipped with their own ground tab or protective earth for safety. They are suitable for small drive applications and have inputs that are either single-phase or three-phase. These controllers also have a ready/fault indicating panel that shows its current state via the installed red/green status indicators. Some 160 series controllers also come with a keypad input due to the optional program keypad module installed, which also has its own LED display featuring 6 digits and it has 7 segments present. 160 series controllers are mounted vertically using either a chassis mount or via DIN rail or mounting screws when they have an IP20, open-type enclosure. Three terminal blocks are also present with 160 series controllers, which are all dedicated to its various wirings. For an optimum performance, make sure to install the controller, together with the 160-BA06LSF1P1 signal follower, in a location where the atmosphere does not have any corrosive substances present and which has a maximum altitude of 3300 feet or 1000 meters. The location where the 160-BA06LSF1P1 is installed should have a temperature that ranges from 32 to 122 degrees Fahrenheit or 0 to 50 degrees Celsius when the controller is operating and from -40 to 185 degrees Fahrenheit or -40 to 85 degrees Celsius when this controller is kept in storage.