160-BA06PPS1

The Allen-Bradley 160-BA06PPS1 is a 3-phase AC Smart Speed Controller (SSC) in Allen-Bradley’s 160 series that comes with a preset speed control and that is chassis mounted. Note that this fan-cooled controller uses an external heatsink. Its voltage rating is 380-460V AC at a line frequency of 50-60 Hz, an input kVA of 5.7, and an operational range of 340-506V AC. The output ratings of the 160-BA06PPS1 include a 2.2 kW and 3 HP 3-phase motor rating, an 80 W power dissipation, and a 6 A maximum output current. Both the output voltage and the output frequency of this controller can be configured, with the output voltage being configurable between 0V and the input voltage and the output frequency is configurable between 0 and 240 Hz.

Make sure to install and store the 160-BA06PPS1 SSC in an area that has an atmosphere that does not have any corrosive gases or vapors in it. It is also suggested that this controller should be installed on a level surface. The 160-BA06PPS1 controller is equipped with 3 terminal blocks for the motor wiring, the line power, and the control wiring of this controller, and with a ready/fault indicating front panel that comes with LED status indicators. These features are standard to all Allen-Bradley 160 Series Smart Speed Controllers. The operating temperature of the 160-BA06PPS1 controller ranges from 0-50 °C and its storage temperature is from -40-85 °C. It also has a maximum operating altitude of 3300 ft. or 1000 m where it can operate fully without derating, and it has a non-condensing relative humidity range of 0-95%. The 160-BA06PPS1 has a 1 g operating vibration and it has a 15 g operating shock.