1394C-AM50-IH

The 1394C-AM50-IH is an Allen-Bradley Servo Controller which is also a servo amplifier. It has a DC input voltage of 530 to 680 Volts. Its output rating is 15.6 kW. It has an inside cabinet heatsink and an amperage rating of 33.2 Amps. It belongs to the filtering and enhanced termination series enhancements. Its efficiency is 98%. It also has a microfarads capacitance of 465 microfarads.  In addition, its static gain is 22.8 RMS Amps/mV. This servo controller also has a 23.3 Amps continuous current. Its peak current is 33.2 Amps. It also has a continuous power voltage of 380 to 460 Volts AC. Its peak power is 380 to 460 Volts AC and it also has 0 to 0.05% of the base speed. Its torque disturbance speed regulation is 100%. The 1394C-AM50-IH also weighs 14.8 pounds.

Operators who intend to install the 1394C-AM50-IH need to confirm that the ambient temperature of the place for the installation of this device is not above 50 degrees Celsius. This device has eight pins which are used for discrete input connections. The surface where this controller is being installed should be rigid, flat, and vertical to prevent shocks, vibrations, oil, dust, mist, and vapors which may corrode it. This controller must be installed in a vertical position. When this is being done, operators need to ensure that proper air flow, bend radius, and module access are maintained. The installation of the 1394C-AM50-IH should be done in a way which enables the operator to do tapping, cutting, welding, and other operations which should be done when the machine is removed from its enclosure. The altitude of the installation of this controller should be a maximum of 1000 meters. Metal debris should be kept from falling into this machine when it is operating because this can result in damage to the circuitry and the machine. The LEDs that this machine has also helps direct the operators on the type of operation that is being carried out. Its dimensions are 13.8 x 11.0 x 2.95 inches.