The Kinetix 2000 multi-axis servo drive which has an output power requirements between 3 - 45 kW (4 - 49 Amps) is designed to provide a Kinetix Integrated Motion solution for applications. There are several series of the Kinetix 2000 multi-axis servo drive, which includes the 2093-AC05-MPx, 2093-AM0x, 2093-AMPx, 2093-ASP06, 2093-PRSxx, 2093-PRF, 2094-AL09, 2094-AL15S, 2094-AL25S,  2094-AL50S,  2094-AL75S,  and the 2094-AL75S-C2. The 2093-AC05-MPx, a series of Kinetix 2000 multi-axis servo drive include the 2093-AC05-MP1, 2093-AC05-MP2, and the 2093-AC05-MP5. The 2093-AC05-MP1 is made of a specific component which includes the integrated axis module (IAM) which is installed on the power rail and is a 230 Volts AC power converter and inverter. The Power Rail (PR), made up of copper bus bars and a circuit board with connectors for each module. The Power Rail provides power and control signals from the converter section to adjacent inverters, which is also composed of compatible servo motors (Low Inertia, Food Grade, and Stainless Steel) and Compatible linear actuators including the MPAI-Axxx (Integrated Actuator) 230 Volt actuators.   Specifications for the 2093-AC05-MP1 includes a Power Converter specification with an Input voltage, AC of 264 Volt RMS, Input Frequency, AC of 47 Hertz, Input Voltage, DC (common bus follower) of 240 Volts DC, Input current, DC (common bus follower) of 6.42 Amps Three-phase power input, Bus output voltage, nominal 325 Volts DC, with a Continuous Power Output to bus of 3.0 KW, Peak power output of 6.0 KW, Efficiency of 95%, and a Converter Capacitance of 540 NF. The 2093-AC05-MP1 comes with IAM Inverter power, with a bandwidth vel. loop of 500 Hz which is similar to most of the 2093 IAM series, and a Nominal Input voltage of 325 Volts DC, a Continuous Current (RMS) of 1.0 Amps which a lot different from the MP2, and MP3 in the series. With a Peak current (RMS of 3.0 Amps and Peak output current time, max of 3 seconds from 0% drive utilization (0% soak). It has an Efficiency of 98% and Capacitance of 200 NF, with a Capacitive energy absorption of 7.5 J.

The 2093-AC05-MP1, like other MPs in the series including the 2093-AC05-MP2 and the 2093-AC05-MP5, comes with a unique Shunt Module (2093-ASP06), and unlike the rest of the series, the 2093-AC05-MP1 has an Auxillary Control Power of 0.30 Amps. The Main and Control Power Input for the 2093-AC05-MP1 is a 264 Volt AC three-phase, and it also comes with a DC common bus fuse, with a Contactor Rating of 264 Volt AC three-phase. The Transformer Specification for the Control Power Input has an input volt-amperes of 500 VA, an Input voltage of 230 Volts AC, and an Output voltage of 240 V AC.  The Power Dissipations specification for the 2093-AC05-MP1 Power Converter in a percentage of rated power output (Watts) are 20%(7.0), 40%(10.5), 60%(14.0), 80%(17.4), and 100%(20.9) respectively. And the Power Dissipations for the 2093-AC05-MP1 Power Inverter in a percentage of rated power output (Watts) are 20%(31.6), 40%(33.6), 60%(35.6), 80%(37.6), and 100%(39.6) respectively. The 2093-AC05-MP1 also comes with Environmental Specifications with an Ambient Temperature for operational (0 to 50 °C (32 to 22 °F)) and non-operational (-40 to 85 °C (-40 to 85 °F)) mode, and a Relative Humidity for operational (5 to 95% noncondensing) and non-operational (5 to 95% noncondensing) mode. It has a vibration of 5...55 Hertz @ 0.35 millimeters (0.014 inches) double amplitude, continuous displacement; 55 to 500 Hertz at 2.0 g peak constant acceleration, shock of 15 g, 11 milliseconds half-sine pulse (3 pulses in each direction of 3 mutually perpendicular directions), and a B31: DSP and SERCOS pins, anti-dust and anti-humidity 1B73LSE: Power Rail connector pins, Converter, Inverter, Shunt, Power Rail, and Slot Filler PCB assemblies, clear UL creepage, clearance issue, and a Conformal Coating. It also has a Weight of 1.32 kilograms (2.9 pounds), and also a Line Filter (2090-XXLF-TC316 (Tesch NF310-16)) of 4 mm2 (10 AWG) Recommended Wire Size.