2093-AC05-MP2 | Allen Bradley Drives Kinetix 2000

2093-AC05-MP2

Rated 4.2 with 18 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2093-AC05-MP2

Revisions: Ser A 
Description: The Allen-Bradley/Rockwell Automation 2093-AC05-MP2 drive is a Kinetix 2000 series multi-axis servo drive. It needs clearance space above it and below it for installation and for airflow, but it does not need any clearance on either side. The 2093-AC05-MP2 multi-axis servo drive can use SERCOS fiber optic cables. It can be protected by fuses and its main input voltage range is 170 to 264 Volts AC for 3-phase and 1-phase AC voltage. The 2093-AC05-MP2 multi-axis servo drive weighs about 2.9 pounds.
Call
Request a quote for 2093-AC05-MP2

Description: The Allen-Bradley/Rockwell Automation 2093-AC05-MP2 drive is a Kinetix 2000 series multi-axis servo drive. It needs clearance space above it and below it for installation and for airflow, but it does not need any clearance on either side. The 2093-AC05-MP2 multi-axis servo drive can use SERCOS fiber optic cables. It can be protected by fuses and its main input voltage range is 170 to 264 Volts AC for 3-phase and 1-phase AC voltage. The 2093-AC05-MP2 multi-axis servo drive weighs about 2.9 pounds.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2093-AC05-MP2.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.2 with 18 reviews

    Technical Specifications for 2093-AC05-MP2

ManufacturerRockwell Automation
BrandAllen-Bradley
ControlSercos Interface
Voltage Rating230 VAC
Wattage600 W
Special FeaturesIntegrated Axis Module
TypeServo Drive
Part Number/Catalog No.2093-AC05-MP2
Sub BrandKinetix 2000
ManufacturerRockwell Automation
BrandAllen-Bradley
ControlSercos Interface
Voltage Rating230 VAC
Wattage600 W
Special FeaturesIntegrated Axis Module
TypeServo Drive
Part Number/Catalog No.2093-AC05-MP2
Sub BrandKinetix 2000
s

About 2093-AC05-MP2

The Kinetix 2000 multi-axis servo drive is designed for engineers and technicians to provide a Kinetix Integrated Motion solution for applications with an output power requirements between 3-45 kW (4-49 A). This was made with several series which include the 2093-AC05-MPx, 2093-AM0x, 2093-AMPx, 2093-ASP06, 2093-PRSxx, 2093-PRF, 2094-AL09, 2094-AL15S, 2094-AL25S2094-AL50S2094-AL75S,  and the 2094-AL75S-C2. The 2093-AC05-MPx, a series of Kinetix 2000 multi-axis servo drive include the 2093-AC05-MP1, 2093-AC05-MP2, and the 2093-AC05-MP5. The 2093-AC05-MPx especially the 2093-AC05-MP2 is made of several components which include compatible servo motors (Low Inertia, Food Grade, and Stainless Steel) and compatible linear actuators including the MPAI-Axxx (Integrated Actuator) 230V actuators. Fiber-optic cables SERCOS are available in an enclosure only, made of PVC, nylon, and glass with connectors at both extremes.



Specifications for the 2093-AC05-MP2 includes Power Converter specification with Input voltage, ac of 264V RMS, and Input Frequency, ac of 47 Hz, and Input Voltage, dc (common bus follower) of 240V dc, Input current, dc (common bus follower) of 6.42 A Three-phase power input, Bus output voltage, nom325V dc, with a Continuous Power Output to bus of 3.0KW, Peak power output of 6.0KW, Efficiency of 95%, and Converter Capacitance of 540 NF. The 2093-AC05-MP2 comes with IAM Inverter power, with a bandwidth vel. loop of 500Hz which is similar to most of the 2093 IAM series, and a Nominal Input voltage of 325V dc, a Continuous Current (RMS) of 2.0 A which a bit higher the MP1, in the series. With a Peak current (RMS of 6.0 A and Peak output current time, max of 3 s from 0% drive utilization (0% soak). It has an Efficiency of 98% like other products in the series and also the same Capacitance of 200 200 NF, and Capacitive energy absorption of 7.5 J like the rest of the MP series.



The 2093-AC05-MP2, like other MPs in the series, including the 2093-AC05-MP1 and the 2093-AC05-MP5, comes with a unique Shunt Module (2093-ASP06), but unlike the rest in its series, the 2093-AC05-MP2 has an Auxillary Control Power of 0.45 A. The Main and Control Power Input for the 2093-AC05-MP2 is a 264V ac three-phase, and it also comes with a DC common bus fuse, with a Contactor Rating of 264V three-phase ac. The Transformer Specification for the Control Power Input has an input volt-amperes of 500VA, an Input voltage of 230V ac, and an Output voltage of 240V ac which is similar to other MPs in the series.  The Power Dissipations specification for the 2093-AC05-MP1 Power Converter in percentage of rated power output (Watts) for the Three-phase are 20%(7.0), 40%(10.5), 60%(14.0), 80%(17.4), and 100%(20.9) and for the single phase are 20%(5.8), 40%(8.0), 60%(10.3), 80%(12.6), and 100%(14.8) respectively. And the Power Dissipations for the 2093-AC05-MP1 Power Inverter in a percentage of rated power output (Watts) are 20%(31.6), 40%(33.6), 60%(35.6), 80%(37.6), 100%(39.6) respectively.



The 2093-AC05-MP2 also comes with the same Environmental Specifications for all members of the series, with an Ambient Temperature for operational (0 to 50 °C (32 to 22 °F)) and non-operational (-40 to 85 °C (-40 to 85 °F)) mode, and a Relative Humidity for operational (5 to 95% noncondensing) and non-operational (5 to 95% noncondensing) mode. It has a vibration of 5...55 Hz @ 0.35 mm (0.014 in.) double amplitude, continuous displacement; 55...500 Hz @ 2.0 g peak constant Acceleration, and Shock of 15 g, 11 ms half-sine pulse (3 pulses in each direction of 3 mutually perpendicular directions), and a B31: DSP and SERCOS pins, anti-dust and anti-humidity 1B73LSE: Power Rail connector pins, Converter, Inverter, Shunt, Power Rail, and a Slot Filler PCB assemblies, clear UL creepage and clearance issue and Conformal Coating. It also has a Weight of 1.32 (2.9) Kg/Ibs, and a Line Filter (2090-XXLF-TC316 (Tesch NF310-16)) of 4 mm2 (10 AWG) Recommended Wire Size.



Technical Description of 2093-AC05-MP2

2093-AC05-MP2: Allan Bradley 3Kilowatts Integrated Axis Module - 0.6 Kilowatts

Repair Services for 2093-AC05-MP2

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2093-AC05-MP2. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 2093-AC05-MP2

Please refer to the manual for more information about the 2093-AC05-MP2 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2093-AC05-MP2 Ser A
2093-AC05-MP2/A, Series A, Rev A Request Quote
Common misspellings:
  • 2o93-AC05-MP2
  • 2093-ACo5-MP2
  • 2093AC05MP2

Dimensions For 2093-AC05-MP2

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 2093-AC05-MP2

Resolutions For 2093-AC05-MP2

About

Technical Specifications for 2093-AC05-MP2

ManufacturerRockwell Automation
BrandAllen-Bradley
ControlSercos Interface
Voltage Rating230 VAC
Wattage600 W
Special FeaturesIntegrated Axis Module
TypeServo Drive
Part Number/Catalog No.2093-AC05-MP2
Sub BrandKinetix 2000
ManufacturerRockwell Automation
BrandAllen-Bradley
ControlSercos Interface
Voltage Rating230 VAC
Wattage600 W
Special FeaturesIntegrated Axis Module
TypeServo Drive
Part Number/Catalog No.2093-AC05-MP2
Sub BrandKinetix 2000

About 2093-AC05-MP2

The Kinetix 2000 multi-axis servo drive is designed for engineers and technicians to provide a Kinetix Integrated Motion solution for applications with an output power requirements between 3-45 kW (4-49 A). This was made with several series which include the 2093-AC05-MPx, 2093-AM0x, 2093-AMPx, 2093-ASP06, 2093-PRSxx, 2093-PRF, 2094-AL09, 2094-AL15S, 2094-AL25S2094-AL50S2094-AL75S,  and the 2094-AL75S-C2. The 2093-AC05-MPx, a series of Kinetix 2000 multi-axis servo drive include the 2093-AC05-MP1, 2093-AC05-MP2, and the 2093-AC05-MP5. The 2093-AC05-MPx especially the 2093-AC05-MP2 is made of several components which include compatible servo motors (Low Inertia, Food Grade, and Stainless Steel) and compatible linear actuators including the MPAI-Axxx (Integrated Actuator) 230V actuators. Fiber-optic cables SERCOS are available in an enclosure only, made of PVC, nylon, and glass with connectors at both extremes.



Specifications for the 2093-AC05-MP2 includes Power Converter specification with Input voltage, ac of 264V RMS, and Input Frequency, ac of 47 Hz, and Input Voltage, dc (common bus follower) of 240V dc, Input current, dc (common bus follower) of 6.42 A Three-phase power input, Bus output voltage, nom325V dc, with a Continuous Power Output to bus of 3.0KW, Peak power output of 6.0KW, Efficiency of 95%, and Converter Capacitance of 540 NF. The 2093-AC05-MP2 comes with IAM Inverter power, with a bandwidth vel. loop of 500Hz which is similar to most of the 2093 IAM series, and a Nominal Input voltage of 325V dc, a Continuous Current (RMS) of 2.0 A which a bit higher the MP1, in the series. With a Peak current (RMS of 6.0 A and Peak output current time, max of 3 s from 0% drive utilization (0% soak). It has an Efficiency of 98% like other products in the series and also the same Capacitance of 200 200 NF, and Capacitive energy absorption of 7.5 J like the rest of the MP series.



The 2093-AC05-MP2, like other MPs in the series, including the 2093-AC05-MP1 and the 2093-AC05-MP5, comes with a unique Shunt Module (2093-ASP06), but unlike the rest in its series, the 2093-AC05-MP2 has an Auxillary Control Power of 0.45 A. The Main and Control Power Input for the 2093-AC05-MP2 is a 264V ac three-phase, and it also comes with a DC common bus fuse, with a Contactor Rating of 264V three-phase ac. The Transformer Specification for the Control Power Input has an input volt-amperes of 500VA, an Input voltage of 230V ac, and an Output voltage of 240V ac which is similar to other MPs in the series.  The Power Dissipations specification for the 2093-AC05-MP1 Power Converter in percentage of rated power output (Watts) for the Three-phase are 20%(7.0), 40%(10.5), 60%(14.0), 80%(17.4), and 100%(20.9) and for the single phase are 20%(5.8), 40%(8.0), 60%(10.3), 80%(12.6), and 100%(14.8) respectively. And the Power Dissipations for the 2093-AC05-MP1 Power Inverter in a percentage of rated power output (Watts) are 20%(31.6), 40%(33.6), 60%(35.6), 80%(37.6), 100%(39.6) respectively.



The 2093-AC05-MP2 also comes with the same Environmental Specifications for all members of the series, with an Ambient Temperature for operational (0 to 50 °C (32 to 22 °F)) and non-operational (-40 to 85 °C (-40 to 85 °F)) mode, and a Relative Humidity for operational (5 to 95% noncondensing) and non-operational (5 to 95% noncondensing) mode. It has a vibration of 5...55 Hz @ 0.35 mm (0.014 in.) double amplitude, continuous displacement; 55...500 Hz @ 2.0 g peak constant Acceleration, and Shock of 15 g, 11 ms half-sine pulse (3 pulses in each direction of 3 mutually perpendicular directions), and a B31: DSP and SERCOS pins, anti-dust and anti-humidity 1B73LSE: Power Rail connector pins, Converter, Inverter, Shunt, Power Rail, and a Slot Filler PCB assemblies, clear UL creepage and clearance issue and Conformal Coating. It also has a Weight of 1.32 (2.9) Kg/Ibs, and a Line Filter (2090-XXLF-TC316 (Tesch NF310-16)) of 4 mm2 (10 AWG) Recommended Wire Size.



Technical Description of 2093-AC05-MP2

2093-AC05-MP2: Allan Bradley 3Kilowatts Integrated Axis Module - 0.6 Kilowatts
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2093-AC05-MP2. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2093-AC05-MP2. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 2093-AC05-MP2 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2093-AC05-MP2 Ser A
2093-AC05-MP2/A, Series A, Rev A Request Quote

Common misspellings:
  • 2o93-AC05-MP2
  • 2093-ACo5-MP2
  • 2093AC05MP2
PDF