The Kinetix 2000 multi-axis servo drive is designed to provide a Kinetix Integrated Motion solution for applications with output power requirements between 3-45 kW (4-49 A). The Kinetix 2000 multi-axis servo drive has several series among which are the 2093-AC05-MPx, 2093-AM0x, 2093-AMPx, 2093-ASP06, 2093-PRSxx, 2093-PRF, 2094-AL09, 2094-AL15S, 2094-AL25S, 2094-AL50S,  2094-AL75S, and the 2094-AL75S-C2. The 2093-AMPx, a series of Kinetix 2000 multi-axis servo drive include the 2093-AMP1, 2093-AMP2, and the 2093-AMP5. The 2093-AMP1 is used to provide a Kinetix Integrated Motion solution for applications like every other member of the Kinetix 2000 multi-axis servo drive has components which include the Axis Module (AM) and the Cables. The AM (single-width) is a shared 230V dc bus power inverter, which is mounts on a Kinetix 2000 power rail with cables. The cables are the motor, power, feedback, and brake cables which include integrally molded, and bayonet-style quick connect/quick-release connectors at the motor.

Specifications for the 2093-AMP1 are an Axis Module (AM) Inverter power, with a bandwidth vel. loop of 500Hz, and a Nominal Input voltage of 325V dc, a Continuous Current (RMS) of 1.0 A, Peak current RMS of 3.0 A, Continuous current (0-pk) of 1.41A, and a Peak Output Current Time, max of (3 s from 0% drive utilization (0% soak). It has an Efficiency of 98% and Capacitance of 200 NF, with Capacitive energy absorption of 7.5 J, and a Continuous power out (nom) of 1.9Kw. The 2093-AMP1 has an Auxillary Control Power of 0.3 A with Input VA of 99VA, and a Max Inrush of 93A and a Shunt Interix 2000, SM, 230V, 50 W with the model number (2093-ASP06). The Transformer Specification for the Control Power Input has an input volt-amperes of 500VA, an Input voltage of 230V ac, and an Output voltage of 240V ac. The Power Dissipation for 2093-AMP1 Power Inverter in a percentage of rated power output (Watts) is 20%(31.6), 40%(33.6), 60%(35.6), 80%(37.6), 100%(39.6) respectively.

The 2093-AMP1 also comes with Environmental specifications with Ambient Temperature for operational (0 to 50 °C (32 to 22 °F)) and non-operational (-40 to 85 °C (-40 to 85 °F)) mode, and Relative Humidity for operational (5 to 95% noncondensing) and non-operational (5 to 95% noncondensing) mode. A Vibration of 5...55 Hz @ 0.35 mm (0.014 in.) double amplitude, continuous displacement; 55...500 Hz @ 2.0 g peak constant Acceleration, and Shock of 15 g, 11 ms half-sine pulse (3 pulses in each direction of 3 mutually perpendicular directions), and a B31: DSP and SERCOS pins, anti-dust and anti-humidity 1B73LSE: Power Rail connector pins, Converter, Inverter, Shunt, Power Rail, and Slot Filler PCB assemblies, clear UL creepage and clearance issue and Conformal Coating. It also has a Weight of 1.32 (2.9) Kg/Ibs, and also a Line Filter (2090-XXLF-TC316 (Tesch NF310-16)) of 4 mm2 (10 AWG) Recommended Wire Size.  This content has been written and compiled by D O Supply and should not be copied.