2097-V31PR0

The Allen-Bradley 2097-V31PR0 is a Kinetix 300 Ethernet I/P indexing servo drives. This servo drive family is specifically a single-Axis drive that generally contributes to cost-effectiveness as it is especially tailored for low-axis count applications. This drive comes with a single Ethernet I/P interface that enables out-ot-the-box connectivity with modern Ethernet I/P networks and simplified integration. Integration to machine controllers up to visualization systems is made possible via this communication interface.

The 2097-V31PR0 is powered by providing an input voltage range of 70-132V rms, 1-phase. It can function as voltage doubler mode with voltage range of 80-264V rms, 1-phase. The drive’s nominal input voltage are 120/240V and an input frequency of 48-62 Hz. The main AC input current of this drive is 9.70 A at 120 V nominal input voltage and voltage doubler mode and 5.0 A at 120 / 240 VAC nominal input voltage. This drive delivers an output current (rms) of 2.0 A and continuous output current of (0-pk) 2.8 A, Peak output current (rms) of 6.0 A and Peak output current (0-pk) 8.5 A and continuous output power of 0.4 kW.

When installing this drive, minimum side clearances are 3 mm or 0.12 in. and 25 mm or 1.0 in. for top and bottom Clearance. Minimum enclosure depth requirement is 185mm or 7.29 in. Following these recommended clearances ensure that adequate air flow is maintained, allowing the drive to be naturally air cooled and maintain adequate working space. Additionally, an extra 150 mm (6.0 in.) clearance is required when the drive is mounted next to noise sensitive equipment or clean wireways.

This enables the successful connection of an entire control solution that includes HMI, Programmable Automation Controllers (PAC), I/O, and motion. It’s not only easy to integrate, its compact design with a dimension of 7.29 x 2.68 inches means it requires less space. This reduces costs on panel layout as well as simplifies wiring. 2097-V31PR0 is a high-performance device that can drive 240 Volt motors at full speed. While compact in size, it provides a reliable and high-speed connectivity that enhances machine productivity. It features Smart Motor Technology that automatically identifies the correct motor-to-drive connectivity when used with TL-Series and MP-Series servo motors and actuators. This reduces commissioning time. This Kinetix 300 servo drive supports a total of 5 different indexing types and 32 indices for position-control performance. It allows for PTO, indexing, Ethernet/IP, and analog commanded control of actuators and servo motors. Because of its flexible control architecture, the 2097-V31PR0 meets a wide range of global machine requirements. The 2097-V31PR0 Servo Drive is equipped with an integrated safe torque off. This functionality is essential in keeping productivity at a high level while maintaining safety. Without turning off power for the entire machine, quick fixes and maintenance work can be done without danger. Such typical tasks include machine setup, removal of jams, and cleaning.