MPAS-A9128K-ALMS2C

The MPAS-A9128K-ALMS2C linear actuator is a linear actuator that has the ability to work in applications that require a unit that converts energy in order to develop a linear motion that can be used to apply force. This actuator is included in the MPAS series by Allen-Bradley. The most common applications on which an actuator can be used are clamping, ejecting, lifting, and pulling applications. The MPAS-A9128K-ALMS2C linear actuator can be mounted with clearances around it. Avoiding placing the actuator beside equipment that releases heat in order to avoid extra overheating and at the same time promote ventilation. The Allen-Bradley MPAS-A9128K-ALMS2C linear actuator comes with a frame size of 250 millimeters and it employs a voltage rating of 200 Volts. It also comes with a stroke length of 1280 millimeters. This actuator also comes with a feedback option that consists of a magnetic linear encoder with high resolution.

The Allen-Bradley MPAS-A9128K-ALMS2C linear actuator needs to be installed in places where there is minimal dust and airborne contaminants that could cause permanent damage to the internal parts of the actuator. Also, it needs to be mounted away from chemical fumes, vapors, or flares. The surrounding temperature must not exceed 40 degrees Celsius and it is recommended to install the actuator in a place where there is sufficient space and light. Regular maintenance plans are recommended since the actuator needs to remain well lubricated and clean. The visibility of the actuator is important so that users can check if the actuator is misaligned or if it needs configuration before advancing on the operations.